Specifications

T3/E3 Multiplexers
T3/E3 Multiplexers
1
1
1
1
T
T
el (toll free): 888-785-7393
el (toll free): 888-785-7393
!
!
Fax: [phone]
Fax: [phone]
!
!
[e-mail]
[e-mail]
!
!
www
www
.pulsewan.com
.pulsewan.com
Equipment Order Number
ATLAS 830 AC ADTN1200780L1
ATLAS 830 DC ADTN1200781L1
T3 Module ADTN1200223L1
T3 Module with D&I ADTN1200225L1
Quad T1/PRI Module ADTN1200185L3
Quad Nx56/64 Module / V.35 ADTN1200184L1
ATLAS 830 T3 Bandwidth Manager
ATLAS 830 is a modular and scalable integrated access device for
end users and network service providers. With the T3 module, the
ATLAS 830 can be configured to accept a T3 circuit and then groom
the channels to other T1 lines or user equipment.
Network service providers may groom several T1s into a T3 circuit, and
ATLAS provides all the internal CSUs and management software to make it
cost effective.
In large-scale networks, a network manager may be able to reduce the
monthly expenses of T1 circuits by upgrading to T3. Usually it becomes
more cost effective and saves money to implement a T3 network after
reaching eight or 10 T1 lines.
The ATLAS 830 T3 Module operates as a T3 bandwidth manager, a "3/1/0
DACS", an M13 Multiplexer, and a DS0 level DACS - all in a single,
economical platform.
ATLAS 830
(see pages 5&6 for other Atlas products)
M13 Mux
M13 Mux
with
with
DACS !
DACS !
MX2800 M13 Multiplexer
The Adtran MX2800 offers bandwidth consolidation at a low price and in the
smallest footprint available in the industry. Measuring only one rack unit high
in 19-inch or 23-inch rackmount configurations, this compact device gives
NSPs and enterprise users a powerful tool for consolidating 28 T1 signals or
21 E1 signals into a T3 or STS-1 circuit. The MX2800 is NEBS Level 3
compliant and comes with a standard 10 Year warranty.
Equipment
Order Number
MX2800 AC Redundant ADTN4202290L6
MX2800 DC Redundnat ADTN4202290L8
MX2800 AC
ADTN4202290L5
MX2800 DC
ADTN4202290L7
The MX2800 is also available with a built in modem
for diagnostics. Call Pulse for details
MX2800
Optimux T3
Equipment Order Number
Optimux-T3 AC, COAX T3 OPT3ACCX
Optimux-T3 DC, COAX T3 OPT3DCCX
Optimux-E3, 16 E1 Balanced OPXLE1/16B
For a full listing of ordering options, contact your
nearest Pulse office.
Optimux-T3
Optimux-T3 is a manageable multiplexer that provides a highly cost effective
and simple solution for transporting multiple E1 and T1 links, as well as a
combination of E1 and T1 (G.747) over a single T3. The Optimux T3 is
available with either 28 Balanced T1/E1 connectors or 21 unbalanced BNC
connector for E1 applications. The T3 connector is available with standard
COAX or fiber (both singlemode and multimode).
Redundant power and secondary T3 link are available. The secondary T3
link provides backup using automatic switchover upon main link failure.
Optimux-XLE1
Optimux XL is an E3-based copper or fiber multiplexer. It provides standard
E3 to 16xE1 multiplexing over a variety of interfaces, including, single mode
fiber, multimode fiber and coax electrical E1. 16 E1 interfaces are available
in either balanced or unbalanced connectors. Redundant power and link
options are also available.
Optimux XLE1 16