Company Overview Solutions for VoIP, Wireless, Wide Area Networks and Datacomm Pulse is a worldwide Value Added Distributor of Data Communications, Wide Area Networking and Voice over IP products and solutions. We provide innovative solutions and comprehensive know-how to assist companies or organizations in advancing their technological goals. Pulse is a leader in solutions for IP, VoIP, Wireless, SONET, Frame Relay, Signaling and Interface Conversion, Voice Compression and last mile extension.
Capability Overview Solutions for VoIP, Wireless, Wide Area Networks and Datacomm Data Communications Wide Area Networking Traditional solutions including TDM and Packet based equipment and last mile termination. Ethernet and IP Extension Solutions to extend Ethernet and IP over copper, fiber and wireless technologies. Interface Conversion Solutions for converting legacy and modern interfaces. IP Optimization Packet Based traffic management, Quality of Service and Load Balancing.
Data Communications SONET/SDH Wide Area Networking TDM over IP Ethernet and IP Extension Voice over IP Interface Conversion Voice Compression Signaling Conversion Wireless IP Optimization Services and Support Corporate Headquarters Massachusetts Office: 1600 Boston Providence Highway Suite 101 Walpole, MA 02081 Tel: 508-660-0340 Fax: 508-660-0339 New York Office: 50 E.
Table of Contents: T1 Integrated Access Devices......................1-2 Cross Connects/Service Concentrators......3-7 T1/E1 Multiplexers........................................8-10 T3/E3 Multiplexers...........................................11 Visit Pulse on the WEB for information on THOUSANDS of other products! www.pulsewan.com Rated as one of the top IT Portals on the Internet! Subrate Multiplexers..................................12-13 Inverse Multiplexers...................................
1 T1 Integrated Access Devices Total Access IADs With millions of small- to medium-sized enterprises existing today, the requirement for carriers to provide integrated voice and data solutions is growing at a rapid rate. ADTRAN® delivers with Total Access Integrated Access Devices (IADs). The Total Access 604, 608, 612, 616, and 624 are cost-effective, fixed-port, IADs designed to Total Access 600 support either TDM or emerging packet architecBattery Backup Option tures.
2 T1 Integrated Access Devices ATM Integrated Access Device LA-140 is an ATM Integrated Access Device (IAD) that enables service providers to offer transmission of voice, LAN and data to small and medium sized businesses over a single access line. LA-140 modules provide maximum flexibility for service integration, ease of use and scalability. They allow migration from E1/T1 to xDSL transmission modes without replacing the unit. The LA-140 performs circuit emulation using AAL1 to support voice interfaces.
3 Cross-Connects / Service Concentrators DXC Access Concentrators The DXC family of modular Multiservice Access Nodes provides non-blocking cross connection for up to 960 DS0s and up to 120 fractional E1/T1 ports. DXC supports built-in local loop solutions. Plug-in interface modules supporting n x 56/64 kbps, E1, T1, E3 or T3 transmission over copper, fiber or HDSL are available. Also available is the DIM module which provides inverse multiplexing capabilities of up to 8 x E1, 8 x T1.
Cross-Connects / Service Concentrators MODULES DIM, the Digital Inverse Multiplexer module, working in conjunction with DE1, DE1B, DT1, DT1B, DE3, DT3, D8E1 or D8T1 interface modules, enables DXC to function as an inverse multiplexer. DIM allows transmission of high speed signals over up to eight E1/T1 lines. This is achieved by breaking down the high speed signals over the multiple E1/T1 lines and routing these signals over different paths or facilities, while ensuring transmission integrity.
5 Cross-Connects / Service Concentrators ATLAS 830 and 890 Series The ATLAS™ 830/890 Integrated Access Device (IAD) is a multifunction, modular platform that provides voice, data, video, and Internet connectivity and WAN access to reduce overall telecommunication expenses. The ATLAS 830/890 is designed to be installed between the network service provider’s circuit(s) and customer premises equipment enabling many network devices to share WAN access and bandwidth.
Cross-Connects / Service Concentrators ATLAS 550 Integrated Access Device The ATLAS 550 is an Integrated Access Device designed to improve and lower the costs of Voice/Data, video, and Internet communications for both enterprise businesses and network service providers. With the ATLAS 550, many WAN functions have now been merged and combined into a small, economical, modular platform that will replace a rack of traditional single function access devices.
7 Cross-Connects / Service Concentrators Total Access® 1500 Total Access® 1500 is a Carrier Class, multiservice access platform for deploying narrowband services from TDM network access. A compact, extremely versatile platform, Total Access 1500 integrates the functionality of many carrier products into a single high density chassis.
8 T1/E1 Multiplexers TSU Series of Modular T1 Multiplexers T1 ers x iple m to t l Mu oo hr ! wit row g The TSU is a series of T1-FT1 DSU/CSUs with one or six expansion slots for multiple end-user application support. The ESU 120 is an E1 version of the TSU 120e.The expansion slots allow the TSU to support up to 24 ports and provide the greatest amount of capacity for T1 multiplexing applications.
9 T1/E1 Multiplexers Megaplex 2200 Megaplex 2200 is a flexible modular TDM integrating access node supporting up to 120 n x 64 kbps channels. PSTN, ISDN and data services are supported either directly or via built-in IDSL modems compatible with RAD's ASMi - 31. Megaplex - 2200 enables integration of multiple dedicated, voice, ISDN, video and LAN channels onto four E1/T1 links.
10 T1/E1 Multiplexers 10 Ye Warr ar anty! Total Access 750 As competition for dial tone heightens, service providers must find integrated access devices that allow cost effective deployment of voice and data services at the customer’s premises. ADTRAN answers this call with the Total Access 750 (TA 750) product line. The TA 750, a low-cost integrated access device, allows service providers a means to offer combined voice and data traffic over a single T1 terminating at a customer’s premises.
11 T3/E3 Multiplexers ATLAS 830 T3 Bandwidth Manager ATLAS 830 is a modular and scalable integrated access device for end users and network service providers. With the T3 module, the ATLAS 830 can be configured to accept a T3 circuit and then groom the channels to other T1 lines or user equipment.
Subrate Multiplexers ** NEW ** TCP/IP Ethernet Main Link Module Now Available!! See Page 13 for details. Kilomux-2100/2104 Sub-Rate Multiplexer The Kilomux time division multiplexer provides an efficient and cost-effective solution for integrating data, voice, fax and LAN traffic over digital data services, leased lines, IP, ISDN and other services. Access to the various services is provided over a variety of standard interfaces at data rates ranging from 9.6 kbps to 1,536 kbps.
13 Subrate Multiplexers Kilomux KML.11 The KML.11 main link module connects the Kilomux directly to an IP/Ethernet based backbone. KML.11 converts the TDM bit stream delivered over the internal Kilomux back plane into IP packets, effectively providing a cost-effective and versatile, modular TDMoIP (TDM over IP) solution for supporting popular TDM applications over emerging IP networks. KML.11 is a standard IP device, supporting ICMP (ping), ARP, next hop and default gateway capabilities.
Inverse Multiplexers 14 IMX-2 Inverse Multiplexer IMX-2 is an inverse multiplexer that splits a data channel between a leased line and an ISDN switched circuit connection depending on mode of operation, line availability and traffic load. Typical applications for the IMX-2 include high speed leased line backup, Dynamic Bandwidth Allocation and Bandwidth on Demand.
15 Inverse Multiplexers UX or IM les f du as mo Atl ATLAS 550 NxT1 HSSI/V.35 User Module The ATLAS 550 NxT1 HSSI/V.35 Module combines multiple T1 circuits into a single logical data stream to an integral HighSpeed Serial Interface (HSSI) port or V.35 port using an optional cable. This hot-swappable user module uses an ADTRAN proprietary T1 inverse multiplexing protocol to support point-to-point, high-speed data applications.
16 S tatistical Multiplexers nd s te er Ex Us ly ! IX te UN mo Re STM Statistical Multiplexer Series The STM High Speed Statistical Multiplexers multiplex up to 24 asynchronous channels onto a single synchronous link. The STM-2 is a miniature statistical multiplexer multiplexing two asynchronous channels onto a single synchronous composite link at data rates up to 19.2 kbps. The STM-4 Statistical Multiplexer, multiplexes 4 asynchronous channels at data rates of 300 to 19,200 bps.
17 T1/E1 CSU/DSUs TSU ACE The TSU ACE is a low cost, single-port T1-FT1 DSU/CSU housed in a compact, durable housing with a single V.35 DTE interface. Configuration and control is accomplished via front panel LCD display and keypad. TSU ACE TSU LT / ESU LT Single Port E1 or T1/Fractional CSU/DSU The TSU/ESU LT is a low cost, single-port T1-FT1 or E1-FE1 DSU/CSU housed in a compact, durable housing with a single V.35 DTE interface. The E1 version is G.703, G.704, and G.828 compatible.
18 T1/E1 CSU/DSUs FCD-T1 FCD-T1 is a CSU/DSU for T1 or Fractional T1 services. It can be used as a rate and interface converter or as an integrating multiplexer for T1 and Fractional T1 services. The FCD-T1 also operates opposite RAD's modular DXC (multiservice access node) products or other vendors' T1 equipment for multilink star applications such as access to SONET networks. The DXCs and FCD-T1 operate together with centralized SNMP network management.
19 T3/E3 CSU/DSUs T3 SU D I! U/ S CS HS h t wi T3SU 300 CSU/DSU for T3 Networks The T3SU 300 provides a cost-effective versatile approach for customers migrating from T1 to T3 services. The T3SU 300 provides a user the ability to use up to four data ports. This flexibility allows the user to spread the cost of the service among multiple applications. One HSSI interface is built in along with three slots which accept additional HSSI or V.35 interfaces. The HSSI interfaces support rates between 75k and 44.
DDS CSU/DSUs 20 (up to 64Kbps) Lo CS w Cos U/D t SU ! DSU 56/64 and DSU 5600 Economical 56/64Kbps CSU/DSU’s The DSU 56/64 and DSU 5600 are economically priced units for application specific DDS or Frame Relay networks. Both units support 56 kbps and 64 kbps loop service rates in point-to-point or multi-point DDS applications. The DSU 56/64 has a V.35 DTE interface that operates synchronously at either 56 or 64 kbps.
21 DDS CSU/DSUs (up to 64Kbps) Di CS DSU IV ESP All Rate/All Purpose SMNP 56/64k CSU/DSU The DSU IV ESP is an all rate DSU/CSU with embedded SNMP, supporting services from 2.4 to 64 kbps. Embedded SNMP is available through a SLIP/PPP port or through a 10BaseT Ethernet port when optioned with the ESP Ethernet Card. The DSU IV ESP is used in either point-to-point, multipoint, or virtual circuits such as Frame Relay. The interface can operate asynchronously up to 57.6 kbps or synchronously up to 64 kbps.
22 CSU/DSU Rack Mount Chassis Smart 16/16e Shelf for High Density Applications The Smart 16/16e is a rack-mount system that complements the DSU III, ISU, and TSU products. The Smart 16 shelf provides a 19 or 23 inch rack-mount solution for up to 16 rack-mount DSU/CSUs, satisfying larger applications. The shelf and all installed units are powered by an internally mounted AC or DC supply. The user has the option of ordering a second supply, allowing redundant protection.
23 VoIP and Voice Compression Tenor VoIP Gateway The Tenor Gateway is the first VoIP MultiPath gateway that intelligently switches calls over both IP networks and the PSTN in order to ensure high voice quality. Unlike conventional VoIP gateways that only route calls over IP networks, the Tenor Gateway can transparently switch calls over to the PSTN if IP network congestion or a device failure impacts voice quality. Digital (T1/E1) and analog versions of the Tenor Gateway are available.
VoIP and Voice Compression Carrier Class VOIP Switch Quintum CMS The Quintum Tenor Carrier MultiPath Switch gives CLECs, ISPs, and other telecommunications entrepreneurs an easy, costeffective way to deliver low-cost, high-quality voice services over IP networks. The Tenor integrates a gateway, a gatekeeper, intelligent call routing and supports QoS all in one solution.
25 VoIP and Voice Compression Tenor Call Routing Server The Quintum® Tenor VoIP Call Routing Server provides CLEC’s, ILEC’s, ISP’s and next generation service providers with scalable centralized network routing, policy enforcement, and administration. The VoIP Advanced Call Routing Server provides enhanced network-wide routing flexibility including QoS-based routing, least-cost routing and sourcebased routing. Routing server will compile network routing statistics and generate network reports.
VoIP and Voice Compression VMUX-2100 Compressed Voice Trunking System The Vmux-2100 is a modular Voice Trunking Gateway that compresses and transports up to 16 E1 or T1 voice trunks over E1, T1 or IP links. Vmux-2100 employs G.723.1, G.729 Annex A and G.711 compression algorithms, together with RAD’s unique TDMoIP multiplexing, to transmit up to 480/384 voice channels, including transparent CAS and CCS signaling, over a single E1/T1 or IP link.
27 xDSL Products Total Access 3000 Multiservice Access Platform The ADTRAN TM Total Access® 3000/3010 is an open architecture, Carrier-class multiservice access platform for deploying broadband and xDSL services from TDM or ATM backbone infrastructures. Its compact size (23 in./19 in. x 6 in.) (58.42 cm/48.26 cm x 15.24 cm) allows installation in places where space is limited, such as crowded COs, RT cabinets, co-location (COLO) sites, and customer premises equip-ment rooms.
28 xDSL Products LRS-52 SHDSL MODEM Rack The LRS-52 is a manageable access system that offers a complete SHDSL solution in the Local Loop. Each port in the LRS-52 works opposite an SHDSL remote device in a point-topoint configuration, providing each port with an independent connection. The product supports SHDSL technology in full compliance with ITU and ETSI standards. The LRS-52 is a costeffective non-modular modem rack that can be used with a dedicated number of ports.
29 xDSL Products ASM-60 VDSL MODEM Using symmetrical VDSL technology, ASM-60 operates at rates up to 10 Mbps over 4-wire lines. The ASM-60 extends the range of digital equipment up to 2km (1.6 miles) over 24 AWG (0.5 mm) 4-wire copper cable. This eliminates the need for repeaters or optical cable in the last mile (local loop) or in a campus network environment.
30 Short Haul MODEMs M Sh inia t Mo ort ure de Hau ms l ! SRM Series of Miniature Short Haul Modems The SRM short haul modems offer a simple, low cost, and highly reliable method to connect digital devices in a local, campus or metropolitan environment. SRM short haul modems connect computers, terminals, Bridges, Routers and similar data communications devices inside buildings, campuses or within city boundaries.
31 Fiber Optic Products E Da xte nd t a , an d V Voic ide e o! FOM Fiber Modem Series The FOM line of fiber optic modems extends the range of data transmission beyond that of any other copper wire modem. Speeds up to 45Mbps are supported. The FOM Series extends the distances of: "Async "V.35 "V.36 "Sync "RS-232 "RS-449 "T1/E1 "RS-530 "G.703 "T3/E3 "X.
32 Fiber Optic Products st Co ver w o Lo ice r! Vo ibe F F-TEL Fiber Optic Phone Adapter TF-TEL is a Fiber Optic Telephone Adapter providing direct, secure fiber optic connection between any telephone set and a PABX or between two telephone sets. F-TEL converts the electrical signals into optical signals. Two in-line units are required to complete a fiber link: a PABX unit (FTEL/CO) for the PBX side and a Subscriber unit (F-TEL/SUB) for the subscriber telephone set. Extended operating range of up to 80.
33 Fiber Optic Products FOMi-T3 and FOMi-E3 Intelligent Fiber Optic Modems FOMi-E3 and FOMi-T3 are intelligent fiber-optic modems designed for the transmission of E3 (34.368 Mbps), T3 (44.736 Mbps) or HSSI signals over multimode and single mode fiber-optic media. The modems can be ordered with dual fiber-optic interfaces allowing full redundancy on the link transmission. A switchover mechanism is activated immediately upon detection of low optical levels on one of the dual optical links.
34 Fiber Optic Products T3 exer l r ltip ibe Mu er F ov OSU 300 Multiport Optical Service Unit The ADTRAN® OSU 300 is a point-to-point fiber product that operates up to 44.2 Mbps, providing users up to four DTE data ports or 12 T1 ports. This multiport OSU provides access to private single mode fiber and allows users to share the bandwidth between multiple applications. The OSU 300 is the latest in a series of broadband access products from ADTRAN.
35 Fiber Optic Products OPTI-3 OC-3 Multiplexer The ADTRAN Total Access® OPTI-3™ sets a new mark for OC-3 multiplexers, delivering three DS3 circuits from a single OC-3 feed. Designed to meet the growing demand for DS3 deployment in today’s economy, the Total Access OPTI-3 eliminates the need for expensive SONET multiplexer equipment in terminal mode applications and provides the fullest use of OC-3 capacity.
36 MODEMs Pulse supplies a complete line of speciality modems for demanding corporate and enterprise applications including: #Leased Line #-48vdc Powered #24vdc Powered #Auto Dial and Backup #Rackmounted #Combined with ISDN #Old Standards #High Density #OEM #Cellular #PCMCIA/Laptop #Video and Voice Give Pulse a call with any application or brand name in which you may be interested. We are here to support you.
37 MODEMs This product has been discontinued by the manufacturer, but is still available new in limited quantities!! Series 4000 High Density Modem Chassis w/T1/E1/PRI / V.90 Compaq Microcom 4000 is a flexible modem platform. It allows you to costeffectively upgrade to new modem technology without having to change your communication server infrastructure.
Interface and Signaling Conversion So l Si ve Pr gn T1/ ob ali E1 le ng m s ! ! TSC-100 Trunk Signaling Converter for T1/E1 The TSC-100 is an advanced protocol/signaling converter system that provides connectivity between incompatible switches or network components. With it's full support of both protocol and rate conversion the TSC-100 is one of the premier solutions for meeting a range of interoperability challenges stemming from incompatible telecommunications components.
39 Interface and Signaling Conversion R2Adapter™ The R2Adapter™ is a line of signaling adapter appliances designed for fast, easy, low-cost integration into carrier networks and vendor equipment. Using existing technology based on the proven FastComm SignalPath™ 201 Signaling Gateway, the R2Adapters allow traditional IP PBX vendors to penetrate international markets where the need for protocol conversion between disparate networks is greatest.
Interface and Signaling Conversion SignalPath™ 230 Protocol Signaling Gateway SignalPath 201 The SignalPath 230 (SP230) is an advanced signaling protocol converter designed to facilitate interoperability between incompatible communication networks. The SP230 enables a seamless interface between in-band and out-of-band networks, and between out-of-band networks and other out-ofband networks. Different types of communication protocols, both in-band and out-of-band, exist globally.
41 Interface and Signaling Conversion MIC and UCI Interface Converter Series The MIC and UCI Interface Conversion products allow the connection between DTE and DCE communications equipment with different Interfaces. They provide both the physical and electrical conversion between the two interfaces. The UCI also provides modem elimination and elastic buffering. Interfaces supported: MIC 24/35 UCI Equipment "V.35 "V.36 "RS-232 "RS-449 "RS-530 "G.703 "X.21 "V.
Digital Patching and Switching Digital Patch Panels Pulse offers a complete line of digital switching and patching products. Patching solutions providing non-intrusive monitoring and patching into data circuits are available for all popular serial interfaces, with speeds up to 10Mbps supported. These systems provide both an efficient and a reliable means of accessing data circuits for network reconfiguration, service restoral, non-interruptive line monitoring and troubleshooting.
43 Frame Relay and X.25 Fram Relay e an X.25 d ! SPS-6/12 Frame Relay/X.25 Switch The SPS-6 and SPS-12, Multi protocol Packet Switches, are high performance, X.25/Frame Relay Switches for routing between X.25/Frame Relay access units. The SPS-6 can switch up to six synchronous links and the SPS-12 up to twelve synchronous links. Two Asynchronous channels are available with each model.
Frame Relay and X.25 44 Express 5000 Series The Express 5000 Series of remote access devices supports Frame Relay connectivity for employees working from branch locations, home offices, and other remote site locations. The Express 5110 is a Frame Relay Access Device (FRAD) supporting legacy protocols and LANs with a built-in 56/64K DSU/CSU and two data ports. The Express 5200 Series includes the same features as the Express 5110 and adds support for voice and dial backup.
45 ISDN Products ISU 128 ISDN Terminal Adapter The ADTRAN ISU 128 is a standalone ISDN service unit that connects data terminal equipment to the ISDN network. The ISU 128 includes NT1 network termination and terminal adapter functionality. The unit can be viewed as an ISDN modem that is well suited for LAN/WAN connectivity and other applications where large data transfers are necessary at high speed rates up to 128 kbps.
46 ISDN Products Express 3000 Series ISDN Teminal Adapter " " " " " " " " " " Asynchronous and synchronous RS-232 interface Expert ISDN automatic SPID and switch detection Two analog POTS ports Place and receive phone calls while transmitting data Hi/fn LZS compression Supports custom calling features and Caller ID Remote configuration Easy configuration via AT commands or VT 100 Flash upgradable Standard 5-year warranty st Co ID P w Lo to S ! N u A ISD Express Series Equipment Express 3000 Async Expr
47 ATM Access ACE-2002 and 2002E Access Concentrator/ATM Termination Unit The ACE-2002 can be used as a carrier-owned demarcation device or as a corporate concentrator connected to the public ATM network. The ACE-2002E is an enhanced version of the ACE-2002 that can accommodate additional E1/T1 interfaces. Information about ACE-2002 also pertains to ACE-2002E unless otherwise specified.
48 ATM Access ACE-101 ATM Network Termination Unit ACE-101 can be used as an ATM NTU (Network termination Unit) for native ATM or as a multiservice access concentrator (MSAC). Located at the customer premises, it can be controlled by an ATM service provider, or it can be used as part of a corporate ATMbased WAN. As an A-NTU, ACE-101 enables a smooth and flexible connectivity between user network and public network.
49 Routers and Bridges WEB RANger-II Entry Level Routers WEB RANger-II is a compact access router that connects a small to medium-size network to the Internet or private services, utilizing Frame Relay, E1/T1 or synchronous services. IP and IPX routing and standard bridging are implemented opposite any third-party router. One or two Ethernet interfaces are supported (10Base2 or 10BaseT).
50 Routers and Bridges RIC-E1, RIC-T1 Interface Converters RIC-E1 and RIC-T1 interface converters enable communication between devices with E1/T1 interfaces and equipment with V.35, X.21, V.36, RS530 interfaces. Ethernet Bridge Option When equipped with IR-ETH/QN interface module, RIC-E1 and RIC-T1 transparently connect remote LANs and VLANs over unframed E1/T1 links utilizing the full E1/T1 bandwidth.
51 Routers and Bridges NetVanta 3000 Series Access Router W NE m The NetVanta 3000 series of access routers from fro RAN ADTRAN, offer small-to-medium size businesses the T AD most cost-effective way to connect branch offices together using Frame Relay and point-to-point digital circuits. These versatile platforms are modular indesign and are a full-featured, low-cost alternative to other brand name routers.
52 Routers and Bridges NetVanta™ 2050 and 2100 The ADTRAN NetVanta™ 2050 and 2100 are small NetVanta 2050 and 2100 Series office/home office VPN/Security gateways providing all the necessary components required to secure an integrated VPN solution. Used primarily for remote access, the NetVanta 2050 is perfect for work-at-home telecom-muters, while the NetVanta 2100 addresses the small office or corporate branch office.
53 W ireless Broadband TRACER Wireless 2xT1, 2xE1 and E1 Systems ADTRAN’s TRACER® is an unlicensed digital microwave radio that uses spread-spectrum technology to provide two independent T1/E1 communication links. As authorized under part 15.247 of the FCC rules, TRACER operates in the 2.4 to 2.4835 GHz and 5.725 to 5.850 GHz industrial, scientific, and medical (ISM) band. TRACER equipment can operate license-free in the U.S. and many other countries.
54 W ireless Broadband TRACER® 4205 and 4305 DS-3 Radio ADTRAN’s TRACER 4205/4305 is a license-free digital microwave radio that provides economical, full-duplex DS-3 connectivity for service providers and corporate networks. The TRACER 4205/4305 DS-3 wireless solution offers 45Mbps of broad-band connectivity in many locations at a significantly lower cost than competing products. The monthly cost savings generate a rapid return on investment while lowering overall communications costs.
55 W ireless Broadband WI-LAN Ultima3 5.8GHz, 12Mbps Ethernet Radio Wi-LAN, the technology leader in Broadband Wireless Solutions, introduces the AWE 120-58 Ultima3 series for service providers and enterprise customers. Operating at 12Mbps, the Ultima3 combines the power of broadband with the freedom of wireless. The Ultima3 benefits from the experience gained in having the largest number of 5.8 GHz multipoint networks deployed today.
56 W ireless Broadband Wi-LAN VIP 110-24 2.4GHz, 11Mbps Radio Overcoming Non Line-of-Sight Obstacles with Patented VINE Technology Wi-LAN’s patented wireless VINE technology is a new networking technology that overcomes the non line-of-sight obstacles and minimizes initial up-front costs of developing networks. VINE technology focuses on overcoming the LOS issues imposed by challenging terrain topography.
57 W ireless Broadband AIRMUX-104 T1/E1/Ethernet Microwave Radio AirMux-104 transmits E1 or T1 and Ethernet traffic at distances of up to 16 km (10 miles). An optional flat panel 28 dBi external antenna increases the operation range to 40 km (24.8 miles). A powerful Forward Error Correction (FEC) mechanism is used to ensure integrity of transmission, providing higher quality of service with BER as low as 1E-10 in optimal conditions.
Equipment Racks Features: Steel frame with full welded construction Two pair fully adjustable EIA-310 tapped mounting rails. Optional two pair universal mounting rails. Ganging holes allow cabinets to be bolted together. Accessories: Aluminum frame smoked Plexiglas doors Steel frame smoked tempered glass doors Full length rear door (solid, louvered or mesh) Two piece rear doors available for 19, 23, and 24" cabinets. Removable swing-out side panels.
59 Services Available Pre-Sales Telephone Support Pre-sales support is always provided at no cost to customers. We can quickly determine your specific needs and make a recommendation. Post Sales Telephone Support Our highly trained engineers are available to walk you through the most challenging installations. Consulting Services Pulse can show you how to speed up your existing network or change it to bring your company up to speed.
IPmux-1/1E IPmux-16 IPmux IPmux-8 TDMoIP Gateways IPmux provides a compact, minimal configuration solution for virtual E1/T1 and ISDN BRI point-topoint applications, transporting these services over IP and Ethernet based networks. IPmux takes data streams from up to 16 E1/T1 or BRI (IPmux-1E) ports and converts them to packets for transmission over the network. The addressing scheme of these frames is IP. These frames are transmitted via the IPmux 10/100BaseT port to the network.
Data Communications SONET/SDH Wide Area Networking TDM over IP Ethernet and IP Extension Voice over IP Interface Conversion Voice Compression Signaling Conversion Wireless IP Optimization Services and Support Corporate Headquarters Massachusetts Office: 1600 Boston Providence Highway Suite 101 Walpole, MA 02081 Tel: 508-660-0340 Fax: 508-660-0339 New York Office: 50 E.
