Instruction manual

ATLAS 800 Series System Manual System Utility Menu Descriptions

ATEL Client

Size (Bytes) Specifies the size in bytes of the data portion of the ping request. The default

value is 64 bytes, and the maximum size is 1024 bytes.

Timeout (ms) Specifies the time in milliseconds to wait for the ping reply before timing out.

The default timeout is 3 seconds (3000), and the maximum timeout value is 10

seconds (10,000).

Round Trip Min Read security: 5

Displays the minimum round trip time of the ping request/reply of the current

set of pings.

Round Trip Avg Read security: 5

Displays the average round trip time of the ping request/reply of the current set

of pings.

Round Trip Max Read security: 5

Displays the maximum round trip time of the ping request/reply of the current

set of pings.

Tx Stats Read security: 5

Displays the number of ping requests transmitted (n

TXED), the number of ping

replies received (n

RXED), and the number of ping requests that were lost (n

LOST).

Reset Stats Resets all ping statistics to zero. If the ping client is active, this menu will stop

it.

Start/Stop If the ping client is currently idle, this menu sends pings to the specified

address. If the ping client is active, the menu either starts or stops sending pings.

ATEL Client

Write security: 5; Read security: 5

Allows a user to remotely configure ADTRAN TSUs using ADLP over the inband management channel

on a V.35 port. This feature only allows for remote sessions through the ATLAS 800 Series to the TSUs,

not vice versa.

ATEL Address Defines the ADLP address (Unit ID) assigned to the remote unit you are trying

to connect to. The valid range is 2 to 65520.

Connect Activator used to start an ATEL client session to the remote unit configured in

the

ATEL ADDRESS field.