Instruction manual

ATLAS 800 Series System Manual System Utility Menu Descriptions

System Utilization

Write security: 0; Read security: 0

Displays statistics related to the ATLAS 800 Series internal operating system. Please check with ADTRAN

Technical Support before attempting to use this menu.

System Selftest

Write security: 3; Read security: 5

Initiates a system self-test. The self-test consists of memory tests and data integrity tests for each installed

module.

Selftest Activates the self-test. To confirm self-test activation, press Y; to cancel the

self-test press

Selected Tests Allows the user to select a system-wide test or an individual card test. Choose

from

ALL TESTS, SLOT: 0 SYS CTRL, or any other installed option/network

module.

Current Test Status Displays which part of self-test is active. See View Selftest Log ON PAGE 97 for

details on individual tests.

Current Slot/Port Displays which slot and port are being tested.

View Selftest Log (Read security: 5) Displays time-stamped log of the tests conducted and the

Pass/Fail results. Self-tests verify data integrity and processor control to each

port. Each port is looped back and a data pattern is sent and tested. The result of

the self-test on each installed port is listed with Pass/Fail results. Figure 7

depicts a typical test log.

Figure 7. View Self-test Log

Self-tests disrupt data flow.