Manualshelf

Instruction manual

ManualsBrandsCompatible Systems ManualsComputer equipmentOctal V.35 - 10/100 RIOP
919293949596979899100
61200780L1-1C © 2004 ADTRAN, Inc. 91
ATLAS 800 Series System Manual System Config Menu Descriptions
Bonding Config
Serial Number Displays the serial number of the feature upgrade.
Lic Cnt Displays the number of instances of the feature that the license provides. This
field may not be applicable for a given feature—if it is not, this field is blank.
Status Reflects the status, PERMANENT or TEMPORARY, of the feature upgrade license
key.
Bonding Config
Write security: 3; Read security: 5
Displays the configuration submenus available for the BONDing Module. This configuration is shared
among all BONDing Modules.Time is given in seconds
TXINIT Timer Specifies the length of time the originating endpoint attempts to detect the
BONDING negotiation pattern from the answering endpoint before deciding the
BONDING call has failed.
TXFA Timer Specifies the length of time both endpoints attempt to detect the BONDING
frame pattern when a call is connected before deciding the BONDING call has
failed. When interoperating with other manufacturers' BONDING equipment, it
may be necessary to change this time so that it matches
TXADD01.
TXADD01 Timer Specifies the length of time both endpoints wait for additional calls to be
connected at the end of negotiation before deciding that the BONDING call has
failed. The factory default setting is sufficient for most calls to connect,
although when dialing overseas it may be necessary to lengthen this timer to
allow for slower call routing.
TXDEQ Timer Specifies the length of time both endpoints attempt to equalize the network
delay between the bearer channels before deciding the BONDING call has
failed.
TANULL Timer Specifies the length of time the answering endpoint attempts to detect the
BONDING negotiation pattern from the originating endpoint before deciding
the BONDING call has failed. It may be necessary to shorten this timer if the
DTE equipment using the BONDING module also has timer constraints for
completing non-BONDING parameter negotiation.
TCID Timer Specifies the length of time both endpoints attempt to negotiate an agreeable
value for bearer channels and channel capacities before deciding the BONDING
call has failed.