Instruction manual

ATLAS 800 Series System Manual System Config Menu Descriptions

Event Logging

ASP Endpoint

Communities (Write security: 0; Read security: 0)

Configures the ADLP list used when accepting incoming traps from remote

ADTRAN TSU 100 Series or ISU 512 units. For a trap to be recognized and

sent to the network management station listed in the Traps Destination field, the

remote unit must be listed in the ASP Endpoint Communities list. The ADLP

Address and ADLP Password parameters must be configured.

SNMP/ASP Proxy (Write security: 0; Read security: 0)

Enables or disables Get_Request capabilities for remote units. When enabled,

this feature allows SNMP requests to be sent from the Network Management

Station through the ATLAS 800 Series to the selected remote unit. Remote units

must be ADTRAN TSU 100 Series or ISU 512 products. All remote units must

be listed in the

ASP ENDPOINT COMMUNITIES list.

SNMP/ASP Polling (Write security: 0; Read security: 0) Enables or disables trap polling through the

ATLAS 800 Series to remote ADTRAN TSU 100 Series or ISU 512 units.

When enabled, this feature allows the ATLAS 800 Series to forward any traps

received from remote units to the Network Management Station listed in the

TRAPS DESTINATION field. The remote unit must be listed in the ASP ENDPOINT

OMMUNITIES for the traps to be forwarded.

Event Logging

Write security: 3; Read security: 5

Sets the system event severity level threshold for each of the ATLAS 800 Series system event types. When

a system event occurs, the event is logged if the event’s severity level is equal to or more severe than the

event type’s current threshold setting. See System Event Log on page 353 for detailed information on the

system events.

Syslog Setup

Write security: 3; Read security: 3

Configures the ATLAS 800 Series Syslog client for use with a Syslog server (supplied with ADTRAN

Utilities or available on most UNIX platforms).

Transmission (Write security: 3; Read security: 3) Enables or disables the transmission of log

events to the external Syslog server

Host IP Address (Write security: 3; Read security: 3) Lists the IP address of the external server

that is running the Syslog host daemon.

Submenus Description

ADLP Address

Enter the ADLP address (Unit ID) of the remote unit. Only traps containing an

ADLP address listed here will be accepted.

ADLP Password

Enter the ADLP password (Unit Password) of the remote unit. The password

will be verified before traps will be accepted from the remote unit.