Instruction manual

61200780L1-1C © 2004 ADTRAN, Inc. 88
ATLAS 800 Series System Manual System Config Menu Descriptions
SNMP
DS1 Total Perf
Thresholds Defines performance threshold values for DS1 Line and Path statistics. Refer to
the ADTRAN Enterprise MIB and DS1 Extension MIB (available on the
ADTRAN website at www.adtran.com
) for more MIB specific information. If a
statistic value exceeds its threshold value, then the corresponding Alert Trap
will be sent if the alert event is armed and Alert Traps are enabled. These
thresholds apply to all DS1 interfaces in the system.
Submenus Description
Total ES Thrsh
Total Errored Seconds (ES) parameter. The default value is 648 for an
approximate BER level of 10E-5.
Total SES Thrsh
Total Severely Errored Seconds (SES) parameter. The default value is 100 for
an approximate BER level of 10E-5.
Total SEFS Thrsh
Total Severely Errored Framing Seconds (SEFS) parameter. The default value is
17 for an approximate BER level of 10E-5.
Total UAS Thrsh
Total Unavailable Seconds (UAS) parameter. The default value is 10 for an
approximate BER level of 10E-5.
Total CSS Thrsh
Total Controlled Slip Seconds (CSS) parameter. The default value is 4 for an
approximate BER level of 10E-5.
Total PCV Thrsh
(D4)
Total Path Code Violations (PCV) parameter, when the Line Type is Super
Frame (AT&T D4 format) DS1. The default value is 691 framing errors for an
approximate BER level of 10E-5.
Total PCV Thrsh
(ESF)
Total Path Code Violations (PCV) parameter, when the Line Type is Extended
Super Frame DS1. The default value is 132,960 CRC errors for an approximate
BER level of 10E-5.
Total LES Thrsh
Total Line Errored Seconds (LES) parameter. The default value is 648 for an
approximate BER level of 10E-5.
Total LCV Thrsh
Total Line Code Violations (LCV) parameter. The default value is 133,400 for
an approximate BER level of 10E-5.