Instruction manual

ATLAS 800 Series System Manual System Status Menu Descriptions

Craft Port

Write security: 2; Read security: 5

Displays the status of the CRAFT port.

Tx Bytes Displays the number of bytes transmitted from the CRAFT port.

Rx Bytes Displays the number of bytes received by the CRAFT port.

Overrun Errs Displays the number of overrun errors received by the CRAFT port.

Framing Errs Displays the number of framing errors received by the CRAFT port.

Clear Counters Write security: 5; Read security: 5

Clears the

CRAFT port statistics. Press Y to activate this command.

System Alarms (ATLAS 830)

Read security: 5

Contains alarm information about the ATLAS system including power and

temperature alarms. The following status symbols are used:

Power Indicates that one or both of the power supplies are not functional. Both the

primary and auxiliary (installed in slots 7 and 8 of the ATLAS 830) power

supplies are continuously monitored to determine failures. If one of these

supplies fails, a message will be placed in the

EVENT LOG (see System Event Log

on page 353 for more details).

Temperature Indicates that the internal temperature of the power supply has exceeded normal

operating limits. When the operating temperature is exceeded by any power

supply, a warning will be placed in the

EVENT LOG but no other action will be

taken (see System Event Log on page 353 for more details).

Symbol Description

[–]

Normal condition

[*]

Failure condition

[!]

No information available