Instruction manual

61200780L1-1C © 2004 ADTRAN, Inc. 77
ATLAS 800 Series System Manual System Status Menu Descriptions
Clear System Event Log
Clear System Event Log
Write security: 3; Read security: 3
Clears the event log. Select Y to clear the log or N to exit the command. The following prompt displays:
Ethernet Port
Read security: 5
Displays status information about the Ethernet port. An asterisk (*) indicates activity for the item. The
following read-only fields are available to review:
I/F Status Indicates the current status of the Ethernet port.
Tx Frames Indicates the number of frames transmitted from the Ethernet port since system
startup.
Rx Frames Indicates the number of frames received on the Ethernet port since system
startup.
Ethernet Rate Indicates whether the Ethernet network is 10 or 100BaseT.
Admin Port
Write security: 2; Read security: 5
Displays the status of the ADMIN port.
Signal Leads Displays the state of the ADMIN port signals (RTS, CTS, DTR, and DCD).
Tx Bytes Displays the number of bytes transmitted from the ADMIN port.
Rx Bytes Displays the number of bytes received by the ADMIN port
Overrun Errs Displays the number of overrun errors received by the ADMIN port.
Framing Errs Displays the number of framing errors received by the ADMIN port.
Clear Counters Clears the ADMIN port statistics. Press Y to activate this command.
After clearing the event log, data cannot be retrieved.
Confirm (y/n)
This will clear the entire event log.