Instruction manual

ATLAS 800 Series System Manual TFTP Server

ADTRAN Utilities Server Menu

Only one configuration transfer session (upload or download) may be active at a time. The TCP/IP

parameters are not saved or overwritten as part of an ATLAS 800 Series unit’s transferred configuration to

allow sending identical configurations to multiple units. When you start this program, a port is

automatically opened.

Server Menu

Provides enable, disable, abort, and exit options.

Enable Enables the TFTP server. The IP address displays in the Status field and Server

Ready displays in the Log field.

Disable Disables the TFTP server. When you select this option, the message PORT

CLOSED displays in the Status field and Port Closed displays in the Log field.

Abort Terminates a transfer that is in progress.

Exit Terminates active transfers and closes the TFTP window.

Print Log

Provides print options.

...to Clipboard Copies the information in the Log field to the clipboard. You can then open any

word processor and paste the information into the program for review.

...to Printer Sends the information in the Log field to the default printer.

Clear Log Deletes the information stored in the Log field.

Help

Provides on-line help and version information.

Contents Opens on-line help.

About Displays version and owner information.

TFTP Server GUI

Status Field This field displays general information about port and transfer status. This field

is read-only. The unlabeled field in the center of the screen displays prompts

about the status of active transfers, such as bytes transferred and received.

Meter Field The XMIT meter provides a visual record of the transfer process.