Instruction manual

61200780L1-1C © 2004 ADTRAN, Inc. 330
ATLAS 800 Series System Manual
8. From the RESTART SCHEDULE menu, select the time for the module to perform a restart after
completing the update process:
• R
ESTART IMMEDIATELY AFTER UPDATE restarts the system immediately after the update is
complete.
• R
ESTART AT SPECIFIED DATE AND TIME allows you to select when the updated system will restart.
If you select this option, a new field called R
ESTART DATE AND TIME displays below the current
field. To use that option, enter the time in 24-hour format (such as 23:00:00 for 11:00 pm). Enter
the date in mm-dd-yyyy format (for example, 09-30-2000).
9. View C
URRENT UPDATE STATUS to verify the progress of the current firmware update or any errors
encountered during the download process. Refer to the table in step 10 for a detailed description of
messages found in this field.
10. Select B
EGIN FIRMWARE UPDATE to start the update process. Enter Y to confirm the transfer and to set
up the module to receive the TFTP Upload.
During the TFTP upload process, various status messages display in C
URRENT UPDATE STATUS to
indicate progress. Table 1 describes these messages.
11. When the update process has successfully completed, IDLE displays in the CURRENT UPDATE STATUS
field and M
ODULE UPDATE COMPLETE displays in the PREVIOUS UPDATE STATUS field.
Depending on your selection in step 8 on page 330, the ATLAS will either restart immediately and
resume operation, or will restart at the specified time and day of the week.
Table 1. Status Messages for TFTP Upload Process
Message Description
Contacting Server
Indicates communication with the TFTP network server is trying to be
established with the specified server address in the TFTP SERVER IP
A
DDRESS field.
Beginning TFTP Transfer
Indicates communication with the TFTP network server has been
established and the update file is being transferred between the ATLAS 800
Series and the TFTP network server.
Completed Indicates the ATLAS 800 Series successfully received the update file.
Error: File Not Found
Indicates the TFTP network server was unable to locate the specified file
name or path in the TFTP S
ERVER FILENAME field.
Error: Access Violation
Indicates the TFTP network server denied the ATLAS 800 Series access to
the given update filename and path. Please verify appropriate user rights are
selected for the specified path.