Instruction manual

61200780L1-1C © 2004 ADTRAN, Inc. 326
ATLAS 800 Series System Manual
Telnet to the ATLAS
Telnet is a utility common to many local area networks that allows remote access to another computer or
piece of equipment.
Refer to the computer system documentation if you are unsure how to establish a Telnet session. Most
computers running a networked version of Microsoft Windows™ or UNIX establish a Telnet session by
simply typing “Telnet <IP Address> ” at a command line prompt.
1. From the same computer used in the previous step, Telnet to the ATLAS and verify that the Telnet
session is properly opened.
If necessary, refer to DLP-2,
System Login and Menu Access, on page 319 and DLP-3, Setting IP
Parameters for the ATLAS 800 Series System,
on page 322 for instructions on logging in to the system and
setting IP parameters.
2. Once the Telnet session is established, press
<Ctrl+L > to logout and close the session.
Follow-up Procedures
Once this procedure is complete, return to the procedure which referred you to this DLP and continue with
the tasks indicated there.