Instruction manual

61200780L1-1C © 2004 ADTRAN, Inc. 323
ATLAS 800 Series System Manual
3. From the SYSTEM CONFIG menu, select the ETHERNET PORT option and press <Enter>.
4. From the S
YSTEM CONFIG/ETHERNET menu, select the IP ADDRESS option and press <Enter>. Enter
the appropriate IP address.
5. From the S
YSTEM CONFIG/ETHERNET menu, select the SUBNET MASK option and press <Enter>.
Enter the appropriate Subnet Mask.
6. From the S
YSTEM CONFIG/ETHERNET menu, select the DEFAULT GATEWAY option and press
<Enter>. Enter the appropriate Default Gateway.
7. Save the changes by pressing the left arrow key to highlight the E
THERNET submenu.
8. Escape out to the S
YSTEM CONFIG menu and logout by pressing <Ctrl + L> .
Follow-up Procedures
Once this procedure is complete, return to the procedure which referred you to this DLP and continue with
the tasks indicated there.
The next three steps require confirmation after each change.