Instruction manual

61200780L1-1C © 2004 ADTRAN, Inc. 313
ATLAS 800 Series System Manual Dial Plan
Pkt Voice: Network Term - Ifce Config
Voice Compression Selects the voice compression algorithm used by this endpoint. ADTRAN FSU
5622 and Express 5200 Series FRADs use CCITT
G.723.1 compression at
6.3 kbps. The Express 5200 Series FRADs also support the proprietary
NETCODER algorithm at 6.4 kbps. Both endpoints must agree about the
compression algorithm choice.
Silence Suppression Reduces the total system bandwidth load by preventing ATLAS from sending
frames containing a special silence code during periods of silence. Both
endpoints must agree to use silence suppression. By default, silence suppression
is Disabled. To prohibit silence frames from transmitting and to decrease the
total system bandwidth,
ENABLE this feature.
Signaling Method Selects the type of signaling that the remote port is configured to expect.
Available options include
E&M IMMEDIATE, E&M WINK, and LOOP START.
Direct Inward Dialing Defines whether Direct Inward Dialing (DID) is used by the remote equipment.
If
DID is enabled, then the following options must be configured:
DID Digits Transferred Defines the number of digits sent to ATLAS from the network if DIRECT INWARD
D
IALING is ENABLED.
DID Prefix Defines to ATLAS the prefix digits which are not received as a part of the DID
number. ATLAS uses the combination of prefix and DID number to determine
the user endpoint that should receive the incoming call.
Trunk Number Determines which user endpoint should receive the incoming call when the
network connection does not provide DID digits. This field only displays if
DIRECT INWARD DIALING is set to DISABLED.
Strip MSD Strips a selected quantity (choose from NONE, 1, 2, and 3) of the most
significant digits (MSD) of a dialed number prior to being forwarded out of the
port. For example, a network port could be set to accept all calls beginning with
9 (9$), and then with
STRIP MSD set to 1, all digits would be sent toward the
network except the leading 9.
STRIP MSD does not affect CALL ACCEPT criteria. All of the digits (including the
MSDs that are subsequently stripped) are used as accept criterion.
Submenu Descriptions
Caller ID
Defines the number ATLAS uses to provide Caller ID to the network for
outgoing calls sent through this endpoint. Setting this menu item is optional.
Source ID
Defines the SOURCE ID. Setting this menu item is optional.