Instruction manual

ManualsBrandsCompatible Systems ManualsComputer equipmentOctal V.35 - 10/100 RIOP

311

312

313

314

315

316

317

318

319

320

ATLAS 800 Series System Manual Dial Plan

Pkt Voice: Network Term - Ifce Config

Enable Schedule Use these submenus to schedule the times when backup is enabled. The

following selections are available for the

ENABLE SCHEDULE menu item.

Test Call This only applies to originating endpoints. Use this menu to schedule regularly

occurring test calls. The following selections are available for the

TEST CALL

menu item.

Min Num DS0s This option will specify the number of DS0s to use for this switched call. If this

number is

1, all calls will be directed to the endpoint, and not use a BONDING

resource. Any number other than

1 will use BONDING resources to inverse

multiplex the multiple switched channels together.

Max Num DS0s This option will specify the number of DS0s to use for this switched call. If this

number is

1, all calls will be directed to the endpoint, and not use a BONDING

resource. Any number other than

1 will use BONDING resources to inverse

multiplex the multiple switched channels together.

Pkt Voice: Network Term - Ifce Config

Write security: 3; Read security: 5

This menu allows the user to define option parameters for ports configured as network packet voice

endpoints. Specifies the configuration parameters for the endpoint.

DLCI Selects the appropriate DLCI for this dial plan entry.

Voice Port Identifies the voice port address of the remote unit. FSU 5622s support ports 1

and 2. A remote ATLAS supports ports 1 through 255.

Conflict Report Describes existing conflicts. Potential problems include DLCI unavailable or

Voice port already in use.

Submenu Descriptions

Enable Time

This is the time of day to enable dial backup.

Disable Time

This is the time of day to disable dial backup. If the disable time is earlier than

the enable time, backup monitoring will be active across midnight.

Days Enabled

Use this record to enable/disable backup monitoring on particular days of the

week.

Submenu Descriptions

Period

How often test calls are to be made

Next Test Time

The date of the next scheduled test call