Instruction manual

ATLAS 800 Series System Manual Dial Plan

Ckt Backup: User Term - Ifce Config

Write security: 3; Read security: 5

This menu allows the user to define option parameters for ports configured as backup endpoints. Specifies

the configuration parameters for the endpoint.

Originate/Answer The following submenus are available for the ORIGINATE/ANSWER menu item:

Outgoing Call Type This only applies to originating endpoints.

Source ID Simplifies the creation of a dial plan in applications where the criterion for

switching calls to a certain endpoint is a function of which endpoint originated

the call.

•

DEFAULT VALUE = 0. Zero is the default ID for all endpoints and accept

numbers. With default values, all calls are routed based only on the dialed

number.

• Multiple endpoints can have the same

SOURCE ID.

• When creating the

CALL ACCEPT list, specify a SOURCE ID(s) as well as a

dialed number or range of dialed numbers to accept.

Outdial Number This only applies to originating endpoints. This is the number dialed when the

endpoint goes into backup.

Force Mode This forces the backup state of this endpoint. This is a configuration setting, so

it will retain its value until it is changed. To temporarily force an endpoint into

backup, or to force a restore, try the Manual activator.

Submenus Description

Originate

The endpoint will originate the backup call.

Answer

The endpoint will answer any incoming calls, but will only go into backup if an

error is detected.

Answer Any

The endpoint will answer any incoming calls and go immediately into backup.