Instruction manual

ATLAS 800 Series System Manual Dial Plan

Pkt Endpt: User Term - Ifce Config

Write security: 3; Read security: 5

This menu allows the user to define option parameters for ports configured as packet endpoints.

Specifies the configuration parameters for the endpoint.

Outdial Number Defines the number dialed to originate a call.

Outgoing Call Type Selects the terminating resource type, either DIGITAL 64K or DIGITAL 56K.

Redial Timer Selects the time delay in seconds between redial attempts.

Randomize Timer Enables/disables random delay added to the redial timer to avoid glare.

Retry Count Defines the number of redials to attempt.

Outgoing Caller ID Defines the presentation of the calling party number for this endpoint.

Source ID Simplifies the creation of a DIAL PLAN in applications where the criterion for

switching calls to a certain endpoint is a function of which endpoint originated

the call.

•

DEFAULT VALUE = 0. Zero is the default value for all endpoints and all accept

numbers. With default values, all calls are routed based only on the dialed

number.

• Multiple endpoints can have the same

SOURCE ID.

• When creating the

CALL ACCEPT list, specify a SOURCE ID(s) as well as a

dialed number or range of dialed numbers to accept.

For example, an application requires that all calls that originate from Port 1 of

the ATLAS 800 Series in Slot 1 be switched to Port 2 of that same module.

Assign a unique

SOURCE ID (e.g., 7) to Port 1 of the module, and then configure

Port 2 to only accept calls from that unique

SOURCE ID (7).