Instruction manual

61200780L1-1C © 2004 ADTRAN, Inc. 305
ATLAS 800 Series System Manual Dial Plan
FXS-8: User Term - Ifce Config
FXS-8: User Term - Ifce Config
Write security: 3; Read security: 5
This menu allows the user to define option parameters for ports which emulate an analog FXS connection
from the Network (PSTN). Specifies the configuration parameters for the endpoint.
Ports Available Indicates which ports of the Octal E&M Option Module have been defined in
this switched endpoint (indicated by “! “), in another switched endpoint
(indicated by “s”), or in a
DEDICATED MAP (indicated by “n”). This field is
read-only. The following characters may display in this field:
Number of Ports Specifies the number of ports ATLAS 800 Series uses for this endpoint.
Signaling Method Defines to the ATLAS 800 Series the type of signaling to be used across this
trunk. The signaling selected needs to match the signaling being provided by the
network (PSTN). The choices include
LOOP START or GROUND START.
The ATLAS 800 Series converts signaling types between two endpoints (network or user
terms).
Forward Disconnect In Loop Start applications, FORWARD DISCONNECT configures the length of time
loop current will stop flowing once the far end has terminated the call.
Applications requiring Forward Disconnect are Fax Servers and ACDs.
Direct Inward Dialing Defines to the ATLAS 800 Series whether Direct Inward Dialing (DID) is being
used by the network. If
DID is ENABLED, then the following information must be
defined:
DID Digits Transferred Defines the number of digits sent to ATLAS 800 Series from the network if DID
is used. This option only displays if
DID is set to ENABLED.
Characters Description
0-9
This port is available.
*
This port is requesting this port for this connection, but the port is
not yet activated.
!
This port is used by this endpoint.
s
This port is used elsewhere in the switched DIAL PLAN.
S
This port is in the switched dial plan and conflicts with this
endpoint.
n
This port is used in one or more DEDICATED MAPS.
N
This port is in one or more DEDICATED MAPS, and conflicts with
this endpoint.
•
This port is the wrong kind of port for this endpoint.