Instruction manual

ManualsBrandsCompatible Systems ManualsComputer equipmentOctal V.35 - 10/100 RIOP

291

292

293

294

295

296

297

298

299

300

ATLAS 800 Series System Manual Dial Plan

USSI: User Term - Ifce Config

Min DS0’s Set this to 1 for typical single-call connections. Setting this greater than 1 will

restrict connections to endpoints supporting aggregation (e.g., BONDING) of

the specified number of DS0s.

Max DS0’s Set this to 1 for typical single-call connections. Setting this greater than 1 will

accommodate connections to endpoints supporting aggregation (e.g.,

BONDING) of up to the specified number of DS0s. This also sets the number of

DS0s presented in the negotiation of outgoing aggregate calls.

USSI: User Term - Ifce Config

Write security: 3; Read security: 5

This menu allows the user to define option parameters for ports configured for USSI interface connections.

Specifies the configuration parameters for the endpoint.

Ports Available Indicates which ports of the selected Quad USSI Option Module have been

defined in this switched endpoint (indicated by “!”), in another switched

endpoint (indicated by “s”), or in a

DEDICATED MAP (indicated by “n”). This

field is read-only. The following characters may display in this field:

Number of Ports Specifies the number of USSI interface ports ATLAS 800 Series uses for this

endpoint.

Number to Dial Specifies the number to dial on an outgoing call.

Call Type Configures the call type (either 56K or 64K) used for outgoing calls from this

endpoint.

Dial Call As Allows the outgoing call to be treated as the selected call type. Options include

DIGITAL (for 56K or 64K data calls), VOICE (for speech calls), and AUDIO (for

3.1kHz audio calls).

Character Description

0-4

This port is available.

This port is requesting this port for this connection, but the port is

not yet activated.

This port is used by this endpoint.

This port is used elsewhere in the switched dial plan.

This port is in the switched dial plan and conflicts with this

endpoint.

This port is used in one or more dedicated maps.

This port is in one or more dedicated maps, and conflicts with this

endpoint.