Instruction manual

ManualsBrandsCompatible Systems ManualsComputer equipmentOctal V.35 - 10/100 RIOP

281

282

283

284

285

286

287

288

289

290

ATLAS 800 Series System Manual Dial Plan

T3 and T3 D&I: User Term - Ifce Config (RBS)

Busy Option The following BUSY OPTION submenus define the response propagated to the

CPE upon receipt of a

DISCONNECT USER-BUSY message from the network.

T3 and T3 D&I: User Term - Ifce Config (RBS)

Write security: 3; Read security: 5

This menu allows the user to define option parameters for ports which emulate an RBS T1 connection from

the network. Specifies the configuration parameters for the endpoint.

First DS0 Defines the first DS0 for this endpoint.The ATLAS 800 Series uses DS0s,

starting with this selection, to send and receive calls to and from the network.

The outgoing calls which are allowed or restricted over these DS0s are set by

OUT#ACCEPT (see page 181) and OUT#REJECT (see page 183).

DS0s Specifies the number of DS0s ATLAS 800 Series uses for this endpoint.

DS0s Available Indicates which DS0s of the T1 have been defined in this switched endpoint

(indicated by “!”), in another switched endpoint (indicated by “s”), or in a

DEDICATED MAP (indicated by “n”). This field is read-only. The following

characters may display in this field:

Signaling Method Defines the type of signaling to be used across this trunk. The signaling selected

needs to match the signaling being provided by the network. The following

choices are available:

E&M IMMEDIATE, E&M WINK, LOOP START, GROUND

TART, and FEATURE GROUP D.

Submenu Descriptions

Normal

Send a Progress message to the CPE and map busy tones.

Pass-Thru

Send a DISCONNECT USER-BUSY message to the User Term CPE device.

Character Description

0-9

This DS0 is available. The digit that displays in this field

represents the last digit of the DS0 number.

This port is requesting this DS0 for this connection, but the DS0

is not yet activated.

This DS0 is used by this endpoint.

This DS0 is used elsewhere in the switched DIAL PLAN.

This DS0 is in the switched dial plan and conflicts with this

endpoint.

This DS0 is used in one or more DEDICATED MAPS.

This DS0 is in one or more DEDICATED MAPS, and conflicts with

this endpoint.