Instruction manual

ManualsBrandsCompatible Systems ManualsComputer equipmentOctal V.35 - 10/100 RIOP

281

282

283

284

285

286

287

288

289

290

ATLAS 800 Series System Manual Dial Plan

T3 and T3 D&I: User Term - Ifce Config (PRI)

Write security: 3; Read security: 5

This menu allows the user to define option parameters for ports which emulate a PRI connection. Specifies

the configuration parameters for the endpoint.

Switch Type Defines the type of PRI switch that the ATLAS 800 Series emulates. If

connected to another ATLAS 800 Series, both need to be set to the same switch

type. The following options are available:

AT&T 4ESS, LUCENT 5E, NORTHERN

DMS 100

, and NATIONAL ISDN.

First DS0 Defines to the ATLAS 800 Series the first DS0 for this endpoint.The

ATLAS 800 Series uses DS0s, starting with this selection, to send and receive

calls to and from the network. The outgoing calls which are allowed or

restricted over these DS0s are set by

OUT#ACCEPT (see Out#Accept on page 268)

and

OUT#REJECT (see Submenus on page 274).

Number of DS0s Specifies the number of DS0s ATLAS 800 Series uses for this endpoint.

Strip MSD Strips a selected quantity (choose from NONE, 1, 2, and 3) of the most

significant digits (MSD) of a dialed number prior to being forwarded out of the

port.

For example, a network port could be set to accept all calls beginning with 9

(9$), and then with

STRIP MSD set to 1, all digits would be sent toward the

network except the leading 9.

STRIP MSD does not affect CALL ACCEPT criteria. All of the digits (including the

MSDs that are subsequently stripped) are used as accept criterion.

Network Specific Facility

Voice and Data Enables the sending of appropriate information to the PSTN. The default for this

option is

NORMAL, and in this case no Network Specific Facility Information

Element is sent. Unless one of the services listed below is subscribed to, the

selection should remain set to

NORMAL.

The list below indicates services that may be subscribed to from the PSTN.

These services require that specific information (such as a Network Specific

Facility Information Element) be sent to the network during call setup.

• AT&T Accunet

• AT&T Dial-It 900/Multiquest

• AT&T International-800

• AT&T SDN

• AT&T Long Distance

• AT&T Megacom 800

• AT&T Megacom

• Nortel Foreign Exchange

• Nortel InWats