Instruction manual

61200780L1-1C © 2004 ADTRAN, Inc. 275
ATLAS 800 Series System Manual Dial Plan
Global Param
Global Param
Write security: 2; Read security: 5
Sets ATLAS 800 Series options which apply to all switched operations, both incoming and outgoing calls.
End of Number
Timeout Write security: 3; Read security: 5
Sets the length of time ATLAS 800 Series waits before assuming the outgoing
dialed number is complete. The default value is six seconds. This timeout will
only be invoked if the dialed number does not match one of the patterns set in
the
NUMBER COMPLETE TEMPLATE menu (see Nbr Complete Templates below).
Country Code Write security: 3; Read security: 5
The country code. Enter your international country code using only digits. For
the United States, enter 1.
Area or City Code Write security: 3; Read security: 5
The local area code. Use for sending caller ID to the network.
Nbr Complete
Templates Write security: 3; Read security: 5
Sets completed number patterns for outgoing calls so that ATLAS 800 Series
recognizes when the phone number is complete. Fields include the index
number (#) and
PATTERN. For example, a local number will be 7 digits long
while a long distance (1+ area code + number) will be 11 digits long. The
Substituted#
Designates the number to be substituted for the number(s) defined in the
ORIGINAL# field. The pattern can be a specific number, or wildcards can be used
as a part of the number specification.
X = Any single digit
N = Any single digit 2 through 9
$ = Any number of digits of any value
9 = This specific number
[1,2,3...] = A single digit in this group
Punctuation characters ( ) - + are ignored and a comma is interpreted as a .5
second pause in the dial string. For example, the
ORIGINAL# field contains $ and
the
SUBSTITUTED# field contains ,256$. All calls routed out this connection will
be delayed .5 seconds and contain a 256 prefix.
Wildcards used in the SUBSTITUTED# field are only valid when used in the same
position (relative to the end of the digit string) as the ORIGINAL# field.
Submenu Descriptions (Continued)