Instruction manual

61200780L1-1C © 2004 ADTRAN, Inc. 274
ATLAS 800 Series System Manual Dial Plan
User Term
Out#Rej The following OUT#REJ submenus define the parameters for the outgoing calls
that ATLAS 800 Series will not send to the network.
Ifce Config Specifies the configuration parameters for the endpoint.The selections displayed
in this field are based on the type of module selected in the
SLOT/SVC option.
For detailed information on submenus for a particular module type, please refer
to the dial plan interface configuration menu discussion for the appropriate
network, option, or resource module.
Some of the options available in this submenu change depending on the type of
modules selected in the
SLOT/SVC or PORT/PEP fields. For more information on
these submenus, refer to the individual module interface configuration menu
discussions in this section.
Subst Templ The following substitution template submenus allow the ATLAS 800 Series to
select calls (based on telephone number) and substitute a user-defined number
for the received digits after the call has been processed by the switchboard.
Substitution templates are created for each entry in the Dial Plan.
Submenus Description
Reject Number
Identifies which numbers this endpoint will not pass on toward the network. Use
when the outgoing call filter is different for different users sharing this endpoint.
The wildcards are identical as in
OUT#ACCEPT (see Out#Accept on page 268).
[0,1]-$ rejects all long distance calls, but only for this USER termination. If
permitted in the
NETWORK termination endpoint, this user could not dial long
distance numbers while other users could.
Data 64K, Data 56K,
Audio, Speech
Rejects outgoing calls based on call type. For example, setting the reject number
to
$, Digital 56/64 to ENABLED, and Audio and Speech to DISABLED, rejects all
digital calls while not rejecting analog calls. This list may remain blank if the
accept list meets desired filtering.
Submenu Descriptions
Original#
Designates the number(s) to be the search criteria for the substitution template.
The pattern can be a specific number, or wildcards can be used as part of the
number specification.
X = Any single digit
N = Any single digit 2 through 9
$ = Any number of digits of any value
9 = This specific number
[1,2,3...] = A single digit in this group
For example, 963-812[012] would be 963-8120 to 963-8122.