Instruction manual

ATLAS 800 Series System Manual Dial Plan

Network Term

Out#Rej Defines parameters for outgoing calls that ATLAS 800 Series will not send to

the network.

Ifce Config Specifies the configuration parameters for the endpoint. The selections

displayed in this field are based on the type of module selected in the

SLOT/SVC

option. For detailed information on submenus for a particular module type,

please refer to the dial plan interface configuration menu discussion for the

appropriate network, option, or resource module.

Some of the options available in this submenu change depending on the type of modules

selected in the S

LT/SVC or PRT/PEP fields. For more information on these submenus,

refer to the individual module interface configuration discussions in this section.

Submenus Description

Reject Number

Identifies which numbers this endpoint will not pass on toward the network. The

reject list may consist of multiple entries. The reject list may be used to more

easily specify the call filtering desired. The wildcards are identical as in

OUT#ACCEPT (see Out#Accept on page 268).

The reject list takes precedence over the accept list. For example, 1-900-$ rejects all

1-900 long distance calls, and 1-$ rejects all long distance calls.

Data 64K, Data 56K,

Audio, Speech

Rejects outgoing calls based on call type. For example, setting the reject number

$, Digital 56/64 to ENABLED, and Audio and Speech to DISABLED will reject

all digital calls, but accept analog calls.

This list may remain blank if the accept list meets desired filtering.