Instruction manual

61200780L1-1C © 2004 ADTRAN, Inc. 265
ATLAS 800 Series System Manual Circuit Status
Line Status
Backup Failed Exceeded MAX NUM REDIALS.
Retry Dial [num] Will retry backup dialing in [num] seconds.
Primary Down The link is in error and waiting on backup.
Answering The link is answering a backup endpoint.
Backup The link is in backup.
Line Status
Read security: 5
Displays the overall status of the connection. The following selections are available for the LINE STATUS
menu item.
Unknown Endpoints do not support (or are not configured) for monitoring.
Active The connection is up and running.
Inactive The connection is down due to configuration (i.e., DTR is down).
Data Alarm The FROM endpoint is in data alarm.
Network Alarm The TO endpoint is in network alarm.
Net/Data Alarm Both the FROM endpoint and the TO endpoint are in alarm.
Data Unknown The status of the FROM endpoint is unknown.
Delay
When present, this indicates that one ATLAS 800 Series has detected a change in state and is counting
down to delay/restore.
Test
Write security: 1; Read security: 5
Contains a test activator and test status displays for dedicated dial backup circuits.
Last Run Time Read security: 5
Displays the date and time of the last test call made through this dedicated dial
backup circuit. (Not seen until circuit is tested.)
Next Run Time Read security: 5