Instruction manual

ATLAS 800 Series System Manual Dedicated Maps

Create/Edit Maps: V35Nx Connects Menu - To/From Config

E1 Trouble Code

Service Sets known values in the signaling bits and the data field for outgoing TS0s

which are cross-connected to a E1 port experiencing alarms. The trunk

conditioning process consists of a 2.5 second transmission (indicating call

termination), followed by a continuous transmission signaling the final

condition as chosen by the user. Set the

E1 TROUBLE CODE SERVICE field to OFF

or VOICE.

T1 Trouble Code Value Displays the Hex value of the 2.5 second pre-alarm transmission.

Create/Edit Maps: V35Nx Connects Menu - To/From Config

Write security: 3; Read security: 5

Specifies the configuration for the FROM connection. The following selections may apply to the Quad Nx

56/64 Option Module, depending on the application:

DS0 Selection Defines DS0s for an Nx port. Use this field to define the DS0s for this

connection. This field only applies to Nx-to-Nx or Nx-to-Pkt Endpt

connections.

DS0 Rate Sets the DS0 rate to either 56 or 64 kbps.

Create/Edit Maps: USSI Connects Menu - To/From Config

Write security: 3; Read security: 5

Specifies the configuration for the TO/FROM connection. The following selections may apply to the Quad

USSI Option Module, depending on the application:

DS0 Selection Defines DS0s for an USSI port. Use this field to define the DS0s for this

connection. This field only applies to USSI-to-USSI, USSI-to-Nx or

USSI-to-Pkt Endpt connections.

DS0 Rate Sets the DS0 rate to either 56 or 64 kbps.

Create/Edit Maps: Octal BRI Connects Menu - To/From Config

Write security: 3; Read security: 5

Specifies the configuration for the TO/FROM connection. The following selections may apply to the Octal

BRI Option Module, depending on the application:

DS0 Selection Defines DS0s for an BRI port. Use this field to define the DS0s for this

connection. This field only applies to BRI-to-BRI, BRI-to-USSI, BRI-to-Nx or

BRI-to-Pkt Endpt connections.

DS0 Rate Sets the DS0 rate to either 56 or 64 kbps.