Instruction manual

ATLAS 800 Series System Manual Dedicated Maps

Create/Edit Maps: T1/PRI Connects Menu - To/From Config

Write security: 3; Read security: 5

Specifies the configuration for the TO/FROM connection. The following selections may apply to the Quad

T1/PRI Option Module, depending on the application:

DS0 Selection Defines DS0s for a T1 port. Use this field to define the DS0s for this

connection. You can enter the DS0s in several ways. For example, to enter DS0s

one through five, enter

1-5. For DS0s one and five, enter 1,5.

DS0 Available Indicates which DS0s of the T1 are assigned. DS0 assignment is based on the

following items.

DS0 Rate Sets the DS0 rate to either 56 or 64 kbps. This field is only valid for T1 ports

mapped to a

PKT ENDPNT.

T1 Trunk Conditioning

Service Sets known values in the signaling bits and the data field for outgoing DS0s

which are cross-connected to a T1 port experiencing alarms.

The trunk conditioning process consists of a 2.5 second transmission (indicating

call termination), followed by a continuous transmission signaling the final

condition as chosen by the user. This selection is only valid for T1 ports having

RBS set to ON.

This option defines to ATLAS 800 Series the type of signaling being used on

the trunk:

E&M, LS/GS NETWORK OR USER, SW56, or CUSTOM.

Item Description

Digit 0-9

This DS0 is available. The digit that displays in this field represents the last digit of the

DS0 number.

This DS0 has been requested for this connection, but the DS0 is not yet activated for this

port.

This DS0 is used by this port in this connection and is currently activated.

This DS0 is used in the switched DIAL PLAN.

This DS0 is used in the switched DIAL PLAN and conflicts with this connection.

This DS0 is already used in this DEDICATED MAP.

This DS0 is already used in this DEDICATED MAP and conflicts with this connection.