Instruction manual

ATLAS 800 Series System Manual Router (IP)

IP Defines the IP address of the server that receives the relay packet.

UDP Ports 1 - 3 Specifies the UDP ports to relay. These fields are active only when ENABLE is

set to

SPECIFIED.

Submenu Description

Enable

Enables this field (select either STANDARD or SPECIFIED). DISABLE is not used.

Standard (Default) Relays any of the following standard UDP protocols:

DHCP, TFTP, DNS, NTP (Network Time Protocol, port 123),

NBNS (NetBIOS Name Server, port 137), NBDG (Net BIOS

Datagram, port 138), and BootP.

Specified Specifies the UDP port (1 to 65,535) in the UDP Port columns

(maximum of three per server).