Instruction manual

ATLAS 800 Series System Manual Router (IP)

Telnet Client

Size Specifies the size in bytes of the data portion of the ping request. The default

value is 64 bytes, and the maximum size is 1024 bytes.

Timeout Specifies the time in milliseconds to wait for the ping reply before timing out.

The default timeout is three seconds, and the maximum timeout value is ten

seconds.

Round trip min Displays the minimum round trip time of the ping request/reply of the current

set of pings.

Round trip avg Displays the average round trip time of the ping request/reply of the cur-rent set

of pings.

Round trip max Displays the maximum round trip time of the ping request/reply of the cur-rent

set of pings.

Tx Stats Displays the number of ping requests transmitted (n txed), the number of ping

replies received (n rxed) and the number of ping requests that were lost (n lost).

Reset Stats Resets all ping statistics to zero. Stops an active ping client.

Start/Stop If the ping client is currently idle, this menu sends pings to the specified

address. If the ping client is active, the menu stops sending pings.

Telnet Client

Write Security: 2; Read security: 2

Allows a user to open a Telnet session to any device listed in the ATLAS 800 Series route table.

Address Defines the IP address assigned to the remote unit you are trying to connect to.

Escape Char Defines the Telnet client escape character. Typing the combination characters

will close the active telnet session to the remote unit specified in the

ADDRESS

field.

Port Defines the port used in the remote login session. Default (for Telnet) is 23.

Option Keystroke

^ ] <Ctrl > + ]

^ \ <Ctrl > + \

^ [ <Ctrl > + [

^ ^ <Ctrl > + <Shift > + 6

^ _ <Ctrl > + <Shift > + -