Instruction manual

ATLAS 800 Series System Manual Router (IP)

Routes

Interface Read Security: 2

Displays the next-hop router or host interface through which IP packets are

routed, as defined here:

Used Read Security: 2

Displays the number of times the router has referenced this route.

Clr Write Security: 2; Read Security: 2

Clears the

USED menu and resets the value to zero.

Flags Read Security: 2

Indicates the properties of this routing table entry, composed of the following

letters:

Hops Read Security: 2

Displays the number of router hops required to get to the network or host.

Ranges from 0 to 16. If set to 16, the route is defined as infinite and cannot be

used.

TTL Read Security: 2

Displays the number of seconds until the address is removed from table. A value

of 999 means the route is static.

Submenu Description

Local

Forwards the packet directly to the ATLAS router.

EN0 IP

Forwards the packet through the ATLAS Ethernet port.

Endpoint Name

Forwards the packet using the DLCI number.

Character Description

route is a host route

route is a gateway route

route learned dynamically from RIP

route learned from an ICMP redirect

route learned from IARP

route is private and is not advertised with RIP

route is to a triggered port (updated only when table changes)