Instruction manual

ATLAS 800 Series System Manual Packet Manager

Packet Endpnts

Submenus Description

Endpnt Name

Displays the name of the packet endpoint.

Protocol

Displays the protocol running on the packet endpoint.

Sublink -

Frame Relay

Displays test menus for the packet endpoint sublinks. The menus vary

depending on the protocol. Testing is not supported on TBOP or PPP.

Name Displays the user-defined name for the DLCI.

DLCI Displays the local address for each PVC as assigned by the

carrier.

Test Displays the test mode for the PVC.

Start

The fixed duration that Test is not running and the DLCI is not

configured for continuous in-band delay measurement. To

change this option, set

DIAGNOSTIC MODE to IN-BAND DELAY

EASUREMENT (also see In-Band Delay Measurement on page

218).

ContDly

The fixed duration TEST is not running and the DLCI is

configured for continuous in-band delay measurement. The

following

RESULTS menu accumulates these measurements.

Stop

The fixed duration TEST is running. The following DURATION

field shows the time remaining in the current test.

Duration Shows the duration in seconds for the fixed-duration test.