Instruction manual

61200780L1-1C © 2004 ADTRAN, Inc. 228
ATLAS 800 Series System Manual Packet Manager
Packet Endpnts
Config - PPP
(continued)
Debug Log
The following events can be viewed in the event log when PPP
events have been turned to
INFO.
LCP Debugging
This turns on LCP negotiation debugging.
IPCP Debugging
This turns on IPCP negotiation debugging.
BCP Debugging
This turns on BCP negotiation debugging.
Authentication Debugging
This turns on authentication debugging.
Unknown Protocol Debugging
This turns on debugging for unknown protocols.
Max Config This value is the number of unanswered configuration requests that
should be transmitted before giving up on negotiation. The default
value is 10.
Max Timer This value is the number of seconds to wait between unanswered
configuration requests. The default value is 2 seconds.
Max Failure Due to the nature of PPP, configuration options may not be agreed
upon between two PPP peers. This value is the number of
configuration-NAKs that should occur before an option is
configuration-rejected. This allows a connection to succeed that
might otherwise fail. The default value is 5.
Keepalive Configures the ATLAS to send keepalive frames on PPP
connections that are not currently in use for data.
Config
Submenus
Description (Continued)