Instruction manual

61200780L1-1C © 2004 ADTRAN, Inc. 223
ATLAS 800 Series System Manual Packet Manager
Packet Endpnts
Link Stats - TBOP
Displays Layer 2 performance statistics. The statistics fields for TBOP reflect the
total count since last cleared.
Tx Packets Total number of HDLC packets transmitted through this packet
endpoint.
Rx Packets Total number of HDLC packets received through this packet
endpoint.
Clear CountersClears all values in this submenu.
Link Stats - PPP
Displays Layer 2 performance statistics. The statistics fields for PPP reflect the total
count since last cleared. The available statistic information is discussed below.
LCP State Displays the current state of the LCP negotiations.
IPCP Displays the UP if PPP IP control has successfully negotiated.
Tx Packets Number of packets transmitted over this link.
Rx Packets Number of packets received over this link.
Clear Counters Resets the Tx and Rx packet counts.
Sublink Stats -
Frame Relay
Displays Frame Relay performance statistics for supported packet endpoint
sublinks. These statistic fields reflect the total count since cleared.
These settings are
not applicable for PPP or TBOP
.
Name User-defined name of a sublink (PVC).
DLCI Local address for each PVC as assigned by the carrier.
State Indicates if this particular sublink (PVC) has been defined as active
by a full status poll, and also indicates if the PVC is in backup
mode. Possibilities include
Active
PVC is active.
Inactive
PVC is inactive.
Active/BU
PVC is active, but in backup mode.
Inactive/BU
PVC is inactive and in backup mode.
Performance
Submenus
Description (Continued)