Instruction manual

61200780L1-1C © 2004 ADTRAN, Inc. 221
ATLAS 800 Series System Manual Packet Manager
Packet Endpnts
Performance Write security: 3; Read security: 5
Displays performance information for each packet endpoint including the
endpoint name, the protocol used, link stats, and sublink stats.
Sig State - PPP
Indicates the status of the PPP negotiation.
Initial This is the first state of LCP negotiation. If the packet endpoint
is connected to a physical port in the
DEDICATED MAP, this state
will usually transition to the
STARTING state to begin the PPP
negotiation.
Starting The packet endpoint stays in this state only when the physical
line is down.
Req - Sent The packet endpoint has sent an LCP configuration request to
the peer and is waiting for an “acknowledge.”
Ack - Recvd The packet endpoint has received an “acknowledge” from the
peer for the sent configuration request.
Ack - Sent The packet endpoint has acknowledged the peer’s configuration
request, but the peer has not acknowledged us.
Opened LCP negotiation on the packet endpoint has finished;
authentication, if enabled, occurs now.
Closing The packet endpoint has sent the peer a “terminate” request and
is waiting for the peer’s acknowledgement.
Closed The packet endpoint has received the peer’s acknowledgement
to the sent terminate request; this is followed by the initial state.
Stopping The packet endpoint has received a terminate request from the
peer.
Stopped The packet endpoint has acknowledged the peer’s terminate
request.
Not ConnectedThe packet endpoint is not connected to the router in the
PACKET CNCTS menu.
Current Port
Displays the connections for the packet endpoint. The letter U in this field
indicates that this packet endpoint is used in the
PACKET CNCTS map. The
remainder of the field indicates the physical port this packet endpoint is
connected to in the
DEDICATED MAP. If the port is a channelized interface such as
a T1, the DS0 assignment is also provided
Performance
Submenus
Description
Endpnt Name
Read security: 5
Displays the packet endpoint name as defined in the
PACKET ENDPNTS/CONFIG menu
(see also
Config on page 213).
Status Submenus Description (Continued)