Instruction manual

61200780L1-1C © 2004 ADTRAN, Inc. 220
ATLAS 800 Series System Manual Packet Manager
Packet Endpnts
Sig Role
Displays the Frame Relay signaling role for this packet endpoint. These settings
are not applicable for PPP
.
User Indicates the user side of the User to Network Interface (UNI).
Network Indicates the network side of the UNI.
Both Indicates the packet endpoint is operating in Network to
Network Interface (NNI) mode.
Off Indicates no LMI signaling is generated or expected. All
DLCI’s are considered active.
Sig Type
Displays the Frame Relay signaling type used on this packet endpoint. These
settings are not applicable for PPP
.
Annex A Signaling using ITU-T Q.933-A.
Annex D Signaling using ANSI T1.617-D.
LMI Signaling using Group of Four.
Sig State - Frame
Relay
Indicates the Frame Relay signaling state on this packet endpoint.
Up Indicates that there is active Frame Relay signaling on this
endpoint. The packet endpoint must be defined by the Frame
Relay configuration settings to show active Frame Relay
signaling.
Down The packet endpoint stays in this state only when the physical
line is down.
Status Submenus Description (Continued)