Instruction manual

ATLAS 800 Series System Manual Async-232 Option Module

Info

ASYNC-232 OPTION MODULE

The ATLAS 800 Series system controller automatically detects the presence of the Async-232 Option

Module (P/N 1200182L1) when it is installed in the system (listed as

ASYNC232). To see the menus for the

Async-232 Option Module via the terminal menu, use the arrow keys to scroll to the

MODULES menu and

press <Enter> to access the module choices. The following menu tree shows the hierarchy of the menus

discussed in this section.

Info

Read security: 5

Provides information about the module part number, serial number and assembly revision.

Part Number Displays the part number of the module.

Serial Number Displays the serial number of the module.

Board Revision Displays the board revision of the installed module.

Firmware Revision Displays the revision of the coprocessor firmware on the installed module.

Processor ID Displays the identification of the processor for the installed module.

Info Signal Status I/O Status

Part Number Port Port

Serial Number DTE Signals Tx Bytes

Board Revision Rx Bytes

Firmware Revision Overruns

Firmware Revision PrtyErrs

FrmErrs

Rst Stats

Session Status Configuration Test

Prt Prt Port

Mode Port Name DTE Local Loopback

Call Dir Bit Rate

Rsc Flow Ctr

Last Disconnect Fmt

Hangup Call Dir

In Ctrl

Dialout

Modem