Instruction manual

61200780L1-1C © 2004 ADTRAN, Inc. 208
ATLAS 800 Series System Manual Modem-24 Resource Module
Configuration
Configuration
Write security: 5; Read security: 5
Analog Rscr Displays the analog resource configuration submenus available for the option
module.
Rx-Frme
Read security: 5
Displays the number of framing errors detected by the analog resource during
the current call. This parameter is reset once the call is disconnected.
Rx-CRC Bad
Read security: 5
Displays the number of received PPP frames by the analog resource from the
remote client modem during the current call. This is used only when the analog
resource is performing Sync-to-Async PPP conversion. This parameter is reset
once the call is disconnected.
Reset Stats
Write security: 5; Read security: 5
Resets the input and output statistics for the given analog resource. This option
resets the transmit and receive statistics for the analog resource.
Submenus Description
RSRC
Read security: 5
Indicates the resource number of the analog call resource. On the Modem-24
Option Module, analog resources are numbered 1-24.
Status
Read security: 5
Indicates the current status of the particular analog call resource and displays
new activity as it occurs. The possible status display values are listed below:
n/a Card is not able to determine the status of the analog call
resource.
Available Indicates this resource is available for use as an analog call.
In Use Indicates this resource is currently being used in an analog call.
Testing Indicates this resource is in a test mode and may be unavailable
for use.
Disabled Indicates this resource has been disabled for use as an analog
call resource. This may be done automatically by the system if
a given analog resource does not initialize properly.
Analog Rsrc I/O
Stats Submenus
Description (Continued)