Instruction manual

61200780L1-1C © 2004 ADTRAN, Inc. 205
ATLAS 800 Series System Manual Modem-24 Resource Module
Status
Data Compression
Displays the data compression mode being used by the analog resource for a
currently active call. If the analog resource is not in use, this field will display
N/A.
Last Disconnect
Reason
Displays the reason for the previous disconnect which occurred on this analog
resource. If no disconnect has occurred on this analog resource, this field will
display
N/A.
Line Parameters
Displays technical details about the analog resource for the currently active call.
This information may be used when troubleshooting modem connection
problems with the Modem-24 Option Module. See Table 7 for a complete
listing.
Table 7. Analog Resource Session Status Line Parameters
Submenu Description
Resource Status
This field indicates the current status of the analog resource. The
following states are valid.
n/a Module is not able to determine the status of the
analog resource
Available This resource is available for use as an analog call
resource
In Use This resource is currently being used in an analog call
Testing This resource is in a test mode and may be
unavailable for use
Disabled This resource has been disable for use as an analog
call resource
Signal to Noise Ratio (dB)
Signal-to-noise ratio (in decibels) on the modem’s receive signal.
Rx Mean Square Error
Mean square error of the received signal.
Round Trip Delay (ms)
Delay between the near and far end modem devices.
Rx Level (-dBm)
Displays the level of the signal (in -dBm) of the signal received by the
resource.
Tx Level (-dBm)
Displays the level of the signal (in -dBm) of the signal transmitted by
the resource.
Near End Echo (-dBm)
Displays the echo level of the signal (in -dBm) of the signal received
by the resource.
Far End Echo (-dBm)
Displays the echo level of the signal (in -dBm) of the signal
transmitted by the resource.
Menu Options Description