Instruction manual

61200780L1-1C © 2004 ADTRAN, Inc. 199
ATLAS 800 Series System Manual Modem-16 Resource Module
Status
Digital Rsrc I/O Stats Write security: 5; Read security: 5
Displays the input and output statistics for the digital resource available on the
Modem-16 Option Module. All statistics are for the current active call and are
reset once the call becomes disconnected.
Submenus Description
Rsrc
Read security: 5
Indicates the resource number of the digital call resource. On the Modem-16
Option Module, analog resources are numbered 1-16 and digital ISDN
resources are numbered 17-32.
Tx-Frames
Read security: 5
Displays the number of data frames transmitted by the digital resource to the
remote client modem during the current call. This parameter is reset once the
call is disconnected.
Rx-Frames
Read security: 5
Displays the number of data frames received by the digital resource from the
remote client modem during the current call. This parameter is reset once the
call is disconnected.
Tx-Bytes
Read security: 5
Displays the number of data bytes transmitted by the digital resource to the
remote client modem during the current call. This parameter is reset once the
call is disconnected.
Rx-Bytes
Read security: 5
Displays the number of data bytes received by the digital resource from the
client modem curing the current call. This parameter is reset once the call is
disconnected.
Rx-Ovrns
Read security: 5
Displays the number of receiver overruns which occurred on the digital resource
during the current call. A receiver overrun occurs when the client modem
transmits data too fast for the digital resource to keep up. This causes data to be
lost. This parameter is reset once the call is disconnected.
Rx-CRC Bad
Read security: 5
Displays the number of frames of data received by the digital resource with an
invalid CRC. This parameter is reset once the call is disconnected.
Rx-Aborted
Read security: 5
Displays the number of aborted receive frames detected by the digital resource
during the current call. This parameter is reset once the call is disconnected.
Reset Stats
Write security: 5; Read security: 5
Resets the input and output statistics for the given analog resource. This option
resets the transmit and receive statistics for the analog resource.