Instruction manual

61200780L1-1C © 2004 ADTRAN, Inc. 184
ATLAS 800 Series System Manual VCOM Option Module
Statistics
Gain Settings Write security: 5; Read security: 5
Contains the configuration for output and input gain for the VCOM Resource
Module.
Current Fax Status Write security: 5; Read security: 5
Enables or disables fax over packet capability using the voice compression
module.
Reset Module Returns the module to its default settings (only available on the ATLAS 890).
Statistics
Write security: 4; Read security: 5
These options initiate different types of tests and display test results.
Device Read security: 5
Indicates the resource number of the packet voice device listed. On the
ATLAS 800 Series, packet voice devices are numbered 1-32.
Usage Time Write security: 4; Read security: 5
Measures the total elapsed time that a packet voice device has the status
BUSY.
The time is expressed with millisecond precision. Available packet voice
devices are assigned new connections using a round-robin technique where all
other available packet voice devices must be used before a given device is
assigned a new connection. This scheme tends to use all packet voice devices
evenly. If a given device shows significantly less elapsed usage time than other
packet voice devices on the same ATLAS 800 Series, that device may be faulty.
ATLAS Frms Write security: 4; Read security: 5
(ATLAS Frames) Counts every frame that the ATLAS 800 Series sends to or
receives from the packet voice device. This count indicates activity but does not
indicate the actual amount of frame relay data exchanged. The total number of
frames handled by the packet voice device is given by the following equation:
Submenu Description
Output Gain
Write security: 3; Read security: 5
Output gain is applied in the receive direction. Choices range from +12 dB
(loudest) to -12 dB (softest) in 3 dB increments. This setting takes affect
immediately.
Input Gain
Write security: 3; Read security:
Input gain is applied in the transmit direction. Choices range from -12 dB
(softest) to +12 dB (loudest) in 3 dB increments. This setting does not affect
currently active calls.
Frames
ATLASTotal
Frames
ATLAS
Frames
ATLASDropped
+=