Instruction manual

ATLAS 800 Series System Manual Octal FXS Option Module

Test

Rx ABCD Receive Signaling bits have local significance only, and represent signaling

between the ATLAS 800 Series Controller and the voice port if the port is

configured in the

DIAL PLAN. The bit pattern is formatted ESF RBS.

Tx ABCD Transmit Signaling bits have local significance only, and represent signaling

between the ATLAS 800 Series Controller and the voice port if the port is

configured in the

DIAL PLAN. The bit pattern is formatted ESF RBS.

Test

Write security: 4; Read security: 5

These options initiate different types of tests and display test results.

Port Write security: 5; Read security: 5

Displays the operating port.

Test 2W Activates 2W (FXS) tests on a per-port basis. Options include OFF, ACTIVE, TIP

PEN, REV. BATTERY, DISABLED, and RINGING. The 2W tests will disrupt the

active call on the selected FXS port. Table 5 on page 178 displays the state of

the 2W conductors during each test.

Reverse Battery

The FXS port has reversed T/R polarity.

Test

This generic FXS port test indicator is used when multiple tests are being run or

the test is not a 2W test.

Active Active test is currently running.

Off Hook Active/Reverse Battery test is running, but an off hook

condition is detected.

Rev. Bat Reverse Battery test is currently running.

Ringing Ringing test is currently running

Tip Open Tip Open test is currently running.

Ring GND Tip Open test is currently running, but ring ground is detected.

(-R) Trip Ringing test is currently running, but an off hook condition is

detected

Status Options Description