Instruction manual

61200780L1-1C © 2004 ADTRAN, Inc. 176
ATLAS 800 Series System Manual Octal FXS Option Module
Info
OCTAL FXS OPTION MODULE
The ATLAS 800 Series system controller automatically detects the presence of the Octal FXS Option
Module (P/N 1200338L1) when it is installed in the system (listed as
FXS-8). To see the menus for the
Octal FXS Option Module via the terminal menu, use the arrow keys to scroll to the
MODULES menu and
press <Enter> to access the module choices. The following menu tree shows the hierarchy of the menus
discussed in this section.
Info
Read security: 5
Provides information about the module part number, serial number and assembly revision.
Part Number Displays the part number of the module.
Serial Number Displays the serial number of the module.
Board Revision Displays the assembly revision.
Status
Read security: 5
Displays the status of each of the FXS ports.
Port Indicates the port number.
Status Displays the call status of each voice port. This field may display the following:
Info Status Test Config
Part Number Port Port Port
Serial Number Status Test 2W Port Name
Board Revision Rx ABCD 1kHz Tone Rx Gain
Tx ABCD Loopback Tx Gain
2W Impedance
Coding Scheme
Status Options Description
Inactive
The port is preconfigured, but the FXS module is not present.
Disabled
The FXS module is present, but the port is not mapped.
Idle
The FXS port is in an idle state for LS configurations.
Tip-Open
The FXS port tip conductor is high impedance.
Off Hook
The FXS port has detected an off hook condition (loop current flowing).