Instruction manual

61200780L1-1C © 2004 ADTRAN, Inc. 170
ATLAS 800 Series System Manual NxT1 HSSI Option Module
IMUX Menus
Test Write security: 3; Read security: 5
These options initiate different types of tests and display test results.
IMUX Menus
Read Security: 5
Contains the inverse muxing configuration parameters for the NxT1 HSSI Option Module.
Status
Submenu Description
Prt
Displays the port number.
Loc LB
Write security: 4; Read security: 5Causes loopback on near-end (local) port
(see Figure 13 on page 175). The following options are available:
Line Metallic loopback
Payld Payload loopback - framing and clocking are regenerated
Submenu Description
Least Dly Port
Link relative delay in milliseconds
Max Diff Dly
Maximum difference in delay in milliseconds
T1: FE State
Far-end state
T1: NE state
Near-end state
T1: FE Fail
Far-end failure state
T1: NE Fail
Near-end failure state
T1: #FE Fail
Number of far-end failures
T1: #NE Fail
Number of near-end failures
# Tx Active
Number of transmit active links
# Rx Active
Number of receive active links
T1: # PM Ticks
Number of PM ticks
T1: TX Cell Rate
Transmit cell rate
T1:Tx Cell Rate
Receive cell rate