Instruction manual

61200780L1-1C © 2004 ADTRAN, Inc. 150
ATLAS 800 Series System Manual T3 D&I Option Module
T3 D&I OPTION MODULE
The ATLAS system controller automatically detects the presence of the T3 with Drop and Insert Option
Module (P/N 1200225L1) when it is installed in the system (listed as
DS3 D&I). To see the menus for the
T3 with Drop and Insert Option Module via the terminal menu, use the arrow keys to scroll to the
MODULES
menu and press <Enter> to access the module choices. The following menu tree shows the hierarchy of the
menus discussed in this section.
DS3 Info Mux Configuration DS3 Alarm Status
DS3 Performance
Current (15M, 24H) DS3 Configuration
Part Number DS1 Disposition Prt Prt Prt
Serial Number DS1s Dropped Alarms Clr Port Name
Board Revision DS1s Passed Thru FE Alarms ES_L Frame
DS1s Dropped DS1 Pair 1-2 through
DS1 Pair 27-28
Rx Framing SES_L Tx Clock
DS1 Framer Revision LOSS_L LBO
M13 Rev CV_P
ES_P
SAS_P
SES_P
UAS_P
DS3 Test DS1 Alarm Status DS1 DS0 Status DS1 DS0 Alarm DS1 Sig Status
Prt Prt
Loopback Alarms
Remote LB
Remote Status
DS1 Performance
Current (15M, 24H) DS1 Configuration DS1 Test
Prt Prt Prt
Clr Port Name Loc LB
ES Frame Remote LB
BES Tx Yel Pattern
SES Tx Prm QRSS/RLB
Results
SEFS LB Accept
LOFC Clr
CSS Inj
UAS
PCV