Instruction manual

ATLAS 800 Series System Manual T3 Option Module

DS1 Performance 15Min

LOFC Loss of Frame Count is a count of seconds in which a valid framing pattern

could not be obtained.

CSS Controlled Slip Second.

UAS Unavailable Second

PCV Path Code Violation.

DS1 Performance 15Min

Write security: 3; Read security: 5

Stores the performance data for the previous 15-minute window. Refer to DS1 Performance Current on page

141 for a detailed description of these fields.

DS1 Performance 24Hr

Write security: 3; Read security: 5

Stores the performance data for the previous 24-hour window. Refer to DS1 Performance Current on page

141 for a detailed description of these fields.

DS1 Configuration

Write security: 3; Read security: 5

All of the following configurable parameters apply to whether the port is connected to a Primary Rate

ISDN circuit or a channelized T1 circuit.

Prt Read security: 5

Displays the T1 number.

Port Name Write security: 3; Read security: 5

Accepts any alpha-numeric name up to 15 characters long, to uniquely identify

each T1 in the T3 circuit

Frame Write security: 2; Read security: 5

This field must be set to match the frame format of the circuit to which it is

connected, available from the network supplier. Choose either

D4 or ESF.

Tx Yel Write security: 3; Read security: 5

Controls the transmission of yellow alarms. Choose either

ON or OFF.

Tx Prm Write security: 3; Read security: 5

Controls the sending of performance report messaging (PRM) data on the

facility data link (FDL). The PRM data continues to be collected even if

XMIT

PRM

is turned off (possible only with ESF format). Choose either ON or OFF.