Instruction manual

61200780L1-1C © 2004 ADTRAN, Inc. 140
ATLAS 800 Series System Manual T3 Option Module
DS3 Info
T3 OPTION MODULE
The ATLAS system controller automatically detects the presence of the T3 Option Module
(P/N 1200223L1) when it is installed in the system (listed as
DS3). To see the menus for the T3 Option
Module via the terminal menu, use the arrow keys to scroll to the
MODULES menu and press <Enter> to
access the module choices. The following menu tree shows the hierarchy of the menus discussed in this
section.
DS3 Info
Read security: 5
Displays general information about the Option Module.
Part Number Displays the part number of the Option Module.
Serial Number Displays the module’s serial number.
DS3 Info DS3 Alarm Status
DS3 Performance
Current (15 m, 24h) DS3 Configuration DS3 Test
Part Number Prt Prt Prt Prt
Serial Number Alarms Clr Port Name Loopback
Board Revision FE Alarms ES_L Frame Remote LB
DS1 Framer Revision
Rx Framing SES_L Tx Clock Remote Status
LOSS_L LBO
M13 Rev CV_P
ES_P
SAS_P
SES_P
UAS_P
DS1 Alarm Status DS1 DS0 Status DS1 DS0 Alarm DS1 Sig Status
Prt
Alarms
DS1 Performance
Current (15Min, 24hr)
DS1
Configuration DS1 Test
Prt Prt Prt
Clr Port Name Loc LB
ES Frame Remote LB
BES Tx Yel Pattern
SES Tx Prm
QRSS/RLB
ResultsSEFS LB Accept
LOFC Clr
CSS Inj
UAS
PCV