Instruction manual

ATLAS 800 Series System Manual Octal BRI U Option Module

Info

OCTAL BRI U OPTION MODULE

The ATLAS 800 Series system controller automatically detects the presence of the Octal BRI Option

Module (P/N 1200186L2) when it is installed in the system (listed as

U-BRI). To see the menus for the

Octal BRI Option Module via the terminal menu, use the arrow keys to scroll to the

MODULES menu and

press <Enter> to access the module choices. The following menu tree shows the hierarchy of the menus

discussed in this section.

Info

Read security: 5

Provides information about the module part number, serial number and assembly revision.

Part Number Displays the part number of the module.

Serial Number Displays the serial number of the module.

Board Revision Displays the board revision of the installed module.

Alarms

Read security: 5

Displays the alarm status for the selected Octal BRI Option Module.

Prt Indicates the port number.

Alarms Displays the current alarm status of each BRI U interface.

Info Alarms Channel Usage Performance Current Configuration Test

Part Number Prt Prt Prt Prt Prt

Serial Number Alarms Cha Reset Port Name Local Loopback

Board Revision NEBE Remote Loopback

FEBE

Alarm Description

L1 Down

A layer one alarm is indicated by an asterisk (*) when the BRI U physical layer

is not active. An L1 alarm is present when problems are detected with the

endpoint or a cabling problem.

Channel

Displays the alarm status of each 2B+D channel. A hyphen (–) indicates no

active channel alarm and D indicates an active D channel alarm.