Instruction manual

Table of Contents

Section 1 Engineering Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Assists network designers in incorporating the ATLAS 800 Series System into

existing networks. Includes pinouts.

Section 2 System Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Provides managers with an overview of the ATLAS 800 Series System.

Section 3 Network Turnup Procedures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Provides step-by-step instructions for installing and powering up the ATLAS 800

Series System.

Section 4 User Interface Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Provides detailed descriptions of all menu options and configuration parameters for

the ATLAS 800 Series System.

Section 5 Detail Level Procedures (DLP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 316

Provides the detailed instruction for performing various unit functions such as

upgrading firmware.

Section 6 System Event Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 353

Explains System Event Log messages and describes configuration of the Event

Log.

Section 7 ADTRAN Utilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 367

Provides instructions for configuring and using the ADTRAN utilities (Telnet,

VT100, Syslog, and TFTP).

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .377