Instruction manual

61200780L1-1C © 2004 ADTRAN, Inc. 123
ATLAS 800 Series System Manual Quad Nx56/64 Option Module
Dial
Dial
Write security: 3; Read security: 5
Dials an Nx port that is configured to ignore DTR.
Prt Read security: 5
Displays the port number.
Mode Configures the dialing mode. The following options are available:
Dial Write security: 0; Read security: 0
Signals the Nx port to dial/clear the call.
Src ID Indicates the SOURCE ID of the number to be dialed. Configure this field in the
Nx
INTERFACE CONFIGURATION section of the DIAL PLAN.
Number Indicates the number to be dialed. Configure this field in the Nx INTERFACE
C
ONFIGURATION section of the DIAL PLAN.
Test
Write security: 4; Read security: 5
These options initiate different types of tests and display test results.
Port Indicates operating port.
Loopback Write security: 4; Read security: 5
Test pattern to be transmitted out the port. The following options are available:
Options Description
Persistent
Redial whenever the call is cleared or if the call fails.
One Time
Attempt the call only once.
Options Description
No Loopback
No active loopback.