Instruction manual

61200780L1-1C © 2004 ADTRAN, Inc. 118
ATLAS 800 Series System Manual Quad Nx56/64 Option Module
Info
QUAD NX56/64 OPTION MODULE
The ATLAS 800 Series system controller automatically detects the presence of the Quad Nx 56/64 Option
Module (P/N 1200184L1) when it is installed in the system (listed as
V35NX). To see the menus for the
Quad Nx 56/64 Option Module via the terminal menu, use the arrow keys to scroll to the
MODULES menu
and press <Enter> to access the module choices. The following menu tree shows the hierarchy of the
menus discussed in this section.
Info
Read security: 5
Provides information about the module part number, serial number and assembly revision.
Part Number Displays the part number of the module.
Serial Number Displays the serial number of the module.
Board Revision Displays the board revision of the installed module.
Alarm Status
Read security: 5
Displays the current alarm status.
Port Indicates the port number.
Info Alarm Status DTE Status Data Rate Inband Stats
Part Number Port Prt Port Port
Serial Number Alarms Dte Status Rate Rx Frames
Board Revision Tx Frames
Rx Bytes
Tx Bytes
PLL/FIFO Configuration Dial Test
Tx Accept
Port Port Prt Port Flow Budget
PLL/FIFO Name Mode Loopback Poll Skips
Clk +/- Dial 511 Rx Overflow
Data Src ID 511 Result Tx Reset
CTS Number Inject Link Verify
DCD CLR Remote Fail
DSR Link Verify Ack
DTR Reset Stats
0 Inh
Inband
Send Leads